FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Coolant leak

    • 1 of 1

       

    10/20/2022 12:39 PM  #1

    Evan
    FYI FORD Member

    Offline

    From: San Diego
    Registered: 4/14/2013
    Posts: 70

    Coolant leak

    Hey everyone hoping someone can help us out with a problem we’re having on a 68 mustang with a 289. It looks like the coolant is leaking when we fill it up from the front passenger side corner on the intake and back driverside corner. It looks like it’s coming from 2 bolts that go through the intake then are open then goes into the heads . Do we need to put thread sealant on these bolts or does it sound like we should pull and re seal the intake?  Any help is appreciated.

     

    10/20/2022 12:46 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 11,736

    Re: Coolant leak

    Sounds like new intake gaskets are needed. Have you tried retorquing the intake bolts?   Don’t overtorque!  The corners of the intake can crack.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    10/20/2022 12:53 PM  #3

    Evan
    FYI FORD Member

    Offline

    From: San Diego
    Registered: 4/14/2013
    Posts: 70

    Re: Coolant leak

    Ok. Thanks. No. Haven’t tried retorquing it yet. Will try that and if doesn’t work will pull it.

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Coolant leak

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.