FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » A/C condensor on 65 Mustang

    • 1 of 1

       

    12/01/2022 9:31 AM  #1

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    A/C condensor on 65 Mustang

    after doing a 24 inch upgrade on Radiator how did you mount the condensor back. MustangSteve had told me he used a 67 mounting kit . But as I google it only thing that comes up is 65-66 bracket kit. I could probaly fab some up but I have limited time at the moment.

    Its really me....I fixed my caps lock .
     

    12/01/2022 2:25 PM  #2

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,329

    Re: A/C condensor on 65 Mustang

    I have a Classic Auto Air daily driver system.
    My condenser mount brackets slip behind the hood release latch assembly.

    You could use larger zip ties to TEMPORARILY support until you can fab or buy brackets. 

    Last edited by Nos681 (12/01/2022 2:26 PM)

     

    12/01/2022 7:28 PM  #3

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,885

    Re: A/C condensor on 65 Mustang

    I have that same condenser in a 20".  Made a couple of brackets off the right and left that bolt to the core support and hold the condenser in front of the radiator.  Mine is flipped over with the hose connections on the right side.  My entire system is on the right side with the hoses going through the original heater blower motor hole.
    Here's a link to the same type of condenser in a 24" from Nostalgic AC Parts which is where I bought all the under hood parts for my system...except the custom hoses and the parts I made.

    https://nostalgicac.com/catalog/product/view/id/273/s/14-x-24-superflow-r-134a-condenser/category/6/
     

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  A/C condensor on 65 Mustang

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.