| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Was out driving the 65 today and it didn't handle like I figured it should. I know our hwys are crap but still. So I did a alinement check. Yup it was short 1.5 deg caster and almost a full - deg of camber, all on DS. Went through and redid and recheck everything. Now I have -5 deg camber both sides and 3.5 degs caster on both. Not sure what had happened, mite of not had the hoist down on the stop blocks last time. Has to be on them to be level. Drives like a stole it now.
Road trip ready now if I could just figure out how to roll the calendar forward some.
Road trip is going to be around 9K. Oregon to Las Vegas, then East to NC, up to NY, back to NC, down to SC to see 6Sal6 and then head home stopping at Mt Rushmore and into Montana for a family stop, then home. Figure on close to 4 weeks. Love the retired life.
Offline
Sounds great Chris.
Remember to stop in Canyon Lake for shrimp tacos. 😁
Online!
Wow! More power to ya! Hope you have a great trip!
Offline
Minus five degrees camber???
Offline
MS wrote:
Minus five degrees camber???
Yeah, I'm thinking there's a decimal point missing there. Unless he's starting some kind on inverse STANCE trend...
Offline
Thanks guys, I was just getting ready to ask about that decimal point.
Chris, if you are going from Vegas to NC you could be going very close to our place...if so you are welcome to stop by.
Offline
Bullet Bob wrote:
Thanks guys, I was just getting ready to ask about that decimal point.
Chris, if you are going from Vegas to NC you could be going very close to our place...if so you are welcome to stop by.
Thank you, thanks everyone really. I dont have the whole trip mapped yet. And yes here is the missing decimal point
( . )
Offline
I guess I could have set it up like those drift cars and wore out my tires but I am not sure I could get -25 degrees camber on the 65
Offline
Welp (thx RPM)...being this far south and east, whine-not detour over to New Bra-full (whatever!) Texas and do the 20th anniversary MS Bash with us!!
I'm sure all the fellas would love to meet cha and get a look at that 'road-warrior' you're driving !!!
From Portland to the east coast and BACK in a classic Mustang !!
6sally6
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |