| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Current 66, and an old pic of probably my 2nd car. If you squint, you can make out the Dragon Wagon name on it
Offline
You do know that you need to have the weight on wheels to do a proper alignment, right?
Offline
Were you you putting the shelby drop on it?
Offline
That is such a cool pic Steve. If I you, I'd have it framed and in my shop.
Offline
Notice that extra 2x4 under the back of the body to give it more aerodynamic advantage
Offline
Steve's first subframe connector in case he goes off the driveway.
Offline
Offline
Nos681 wrote:
Steve's first subframe connector in case he goes off the driveway.
BILLY WALTON from GEORGIA wrote:
Ron68 wrote:
You do know that you need to have the weight on wheels to do a proper alignment, right?Were you you putting the shelby drop on it?
Really dig'in those socks too !
6s6
Offline
Nos681 wrote:
Steve's first subframe connector in case he goes off the driveway.
BILLY WALTON from GEORGIA wrote:
Ron68 wrote:
You do know that you need to have the weight on wheels to do a proper alignment, right?Were you you putting the shelby drop on it?
If I WAS doing a Shelby drop, I must have invented it. That picture was circa 1962, way before the first Mustang was on the road.
Offline
The 2015 Gt is doing very well only 22k in 8 years lol I drive the 65 more has 3 recalls but I won’t take it in
Offline
Offline
Offline
That Red truck is cool!
Offline
lowercasesteve wrote:
That Red truck is cool!
Looks like an older Daihatsu.
Offline
Blue Mustangs are the best! (65 convertibles are too!)
Offline
Rudi wrote:
lowercasesteve wrote:
That Red truck is cool!
Looks like an older Daihatsu.
I believe it to be a Suburu Sambar. Kind of obscure, but really cool.
I really like the Model T, as well.
Offline
Rudi wrote:
lowercasesteve wrote:
That Red truck is cool!
Looks like an older Daihatsu.
The red truck was disassembled in a guy's living room and when he passed, his son and I struck a deal. We filled two trailers with frame, parts, etc. and almost ran out of room. Like most projects, there were some parts missing that were very difficult to track down.
The truck was manufactured by Fuji Heavy Industries and I understand approximately 300 were imported into the US in 1970 by Malcolm Bricklin under the name "Subaru of America, Inc.". The truck has a two cylinder, two stroke, 360 cc, air cooled engine mounted in the rear. The truck is called a "Sambar" and there is a van and sedan using the same engine. I also have the sedan.
Offline
2 cylinder/2 skroke !!!!! Howz it run ?
6s6
Offline
6sally6 wrote:
2 cylinder/2 skroke !!!!! Howz it run ?
6s6
With compression of about 6:1, porting from the 1960's if not earlier, and approximately 16 hp pushing 1081 pounds which includes me in it, a headwind on flat ground will slow it down. Small hills slow it down. With a long run up, no headwind, no slope, I generally see about 50-55 mph. Skinny bias ply tires stretch out braking distances, so care needs to be exercised. There are all kinds of modifications to get more speed out of them, but I am keeping mine stock.
A Tesla engineer I met wants to electrify it with a Zero motorcycle motor, but I don't see that in my immediate future. Maybe a few years from now.
Offline
boss347convertible wrote:
Rudi wrote:
lowercasesteve wrote:
That Red truck is cool!
Looks like an older Daihatsu.The red truck was disassembled in a guy's living room and when he passed, his son and I struck a deal. We filled two trailers with frame, parts, etc. and almost ran out of room. Like most projects, there were some parts missing that were very difficult to track down.
The truck was manufactured by Fuji Heavy Industries and I understand approximately 300 were imported into the US in 1970 by Malcolm Bricklin under the name "Subaru of America, Inc.". The truck has a two cylinder, two stroke, 360 cc, air cooled engine mounted in the rear. The truck is called a "Sambar" and there is a van and sedan using the same engine. I also have the sedan.
In 1969 and early 1970 when the ship I was on (USS Hancock) pulled into port in Sasebo, Japan a couple of times, I recall seeing some small trucks like that - small with open bed and small cab - in use in town and around the docks where the ship was berthed. Don't recall seeing any F-150's, etc around town.....
That is a sweet looking little truck though - nice work on the restoration.
Offline
That red truck is cool.
Did you drive the Model T through Death Valley?
Offline
Ron68 wrote:
boss347convertible wrote:
Rudi wrote:
Looks like an older Daihatsu.The red truck was disassembled in a guy's living room and when he passed, his son and I struck a deal. We filled two trailers with frame, parts, etc. and almost ran out of room. Like most projects, there were some parts missing that were very difficult to track down.
The truck was manufactured by Fuji Heavy Industries and I understand approximately 300 were imported into the US in 1970 by Malcolm Bricklin under the name "Subaru of America, Inc.". The truck has a two cylinder, two stroke, 360 cc, air cooled engine mounted in the rear. The truck is called a "Sambar" and there is a van and sedan using the same engine. I also have the sedan.In 1969 and early 1970 when the ship I was on (USS Hancock) pulled into port in Sasebo, Japan a couple of times, I recall seeing some small trucks like that - small with open bed and small cab - in use in town and around the docks where the ship was berthed. Don't recall seeing any F-150's, etc around town.....
That is a sweet looking little truck though - nice work on the restoration.
Post WWII, I am told Japan taxed on engine displacement, so I would guess most of the cars during your deployment were small. I took the truck down to the metal so it should be rust free for many years.
Thanks for your service. My son is presently on a one year deployment on a destroyer in Japan.
Offline
BobE wrote:
That red truck is cool.
Did you drive the Model T through Death Valley?
Thanks. Yes, in May 2021 drove the Model T from home, to, through Death Valley and back home. 670 miles. We were on the road at least three days, maybe four. I just did a hundred mile trip in the Model T last weekend. From San Luis Obispo, along the California Central Coast, then into the coastal mountains into Paso Robles, then back to San Luis Obispo. Absolutely gorgeous trip as everything is green from the rain.
Offline
boss347convertible wrote:
BobE wrote:
That red truck is cool.
Did you drive the Model T through Death Valley?Thanks. Yes, in May 2021 drove the Model T from home, to, through Death Valley and back home. 670 miles. We were on the road at least three days, maybe four. I just did a hundred mile trip in the Model T last weekend. From San Luis Obispo, along the California Central Coast, then into the coastal mountains into Paso Robles, then back to San Luis Obispo. Absolutely gorgeous trip as everything is green from the rain.
So do you live in SLO, or nearby?
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |