| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
So ah couple weeks ago I ordered a pair of (Outer rocker Panels) from ( Dynacorn International) for my 66 coupe. What I got wasn't even close! I understand that re-pop parts require some massaging to make fit, But these aren't even in the ball park! I made a cardboard template of the contour of ones on the car and set it against these re-pop's. (1/2" gap!) There's is almost flat! And it looks like sombody tried to dolly the rear lip at the wheel well to make it into,Well somthing? I've used other (Dynacorn) panels on this car that were a fantastic fit. (upper&lower cowl),(full length floor pans), (toe boards). By the way these have (Made in China) stickers on them. I thought Dynacorn was a Canadian company?
Last edited by Derek (11/16/2013 2:16 PM)
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |