FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Stock 66 Third Member Differential (8 inch, 2.8, Open)

    • 1 of 1

       

    1/04/2023 6:03 AM  #1

    TremendousWand
    I FYI 24-7

    Offline

    Registered: 5/16/2013
    Posts: 657

    Stock 66 Third Member Differential (8 inch, 2.8, Open)

    https://ibb.co/2FGsXNN
    https://ibb.co/NmKtZ5j

    Pulled from a 1966 stock 8 inch rear.  I believe to be open 2.8.  The metal tag was worn beyond readability.

    When previously installed, there was leak coming from the yoke.  The gears appear to be intact and free from cracks and chips.  When installed, this made no noise and gave no indication of mechanical issues.  Needless to say, this needs to be rebuilt.

    I'm in Richardson, Texas.  I will meet a fellow enthusiast within an hours drive.  $200

     

    1/15/2023 12:43 PM  #2

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Stock 66 Third Member Differential (8 inch, 2.8, Open)

    Let me know how sale goes I may try and sell mine to in Ga  same way don't really wanna ship.

    Its really me....I fixed my caps lock .
     

    6/27/2023 1:48 PM  #3

    TremendousWand
    I FYI 24-7

    Offline

    Registered: 5/16/2013
    Posts: 657

    Re: Stock 66 Third Member Differential (8 inch, 2.8, Open)

    Sold. $200

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Stock 66 Third Member Differential (8 inch, 2.8, Open)

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.