FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Made it back from a Helluva great time

    • 1 of 1

       

    10/02/2023 1:40 PM  #1

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,562

    Made it back from a Helluva great time

    Got home about midnight last night. Was warmly welcomed by my dogs - and the wife too (what, you're back already?) :-)
    Have to say that I had a blast - all thanks to our fearless leader MustangSteve! He busted his butt putting on a very fun and successful Bash! Very well planned and executed MS! Have to say that I surely didn't starve on this trip - great food, great venues, and somehow I found a few extra pounds had crept up and attached themselves to me. Must be a Texas thing....
    So very nice to see a few old faces, and meet a few new ones - what a great group of Mustangers, and a really great group of incredible Mustangs were present too.
    Next year's Bash in California? The first on the West coast - might be within driving range......

    Hope everyone has a safe trip home - and until next time....Keep those ponies running!
     

    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
     

    10/04/2023 12:51 PM  #2

    Coupedaddy
    I FYI 24-7

    Offline

    From: Katy TX
    Registered: 4/18/2013
    Posts: 317

    Re: Made it back from a Helluva great time

    Glad you made it home praying all is well it was a blast as always

    Last edited by Coupedaddy (10/04/2023 12:52 PM)

     

    10/04/2023 4:29 PM  #3

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,627

    Re: Made it back from a Helluva great time

    Ron68 wrote:

    .
    Next year's Bash in California? The first on the West coast - might be within driving range......
     

     
    ~1,000 miles...absolutely drivable with that 4R70W.  You can do it Ronny!

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    10/04/2023 4:40 PM  #4

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,960

    Re: Made it back from a Helluva great time

    RPM, aka Bearing Bob wrote:

    Ron68 wrote:

    .
    Next year's Bash in California? The first on the West coast - might be within driving range......
     

     
    ~1,000 miles...absolutely drivable with that 4R70W.  You can do it Ronny!

     
    2535 miles and 37 hours on the road from my place.
    The bash seems to be further from me each year!😢

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Made it back from a Helluva great time

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.