FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Does anyone have a source for a small male distributor cap?

    • 1 of 1

       

    12/10/2023 4:09 PM  #1

    Daze
    Forum Moderator & Bash host 2011

    Offline

    From: Kalispell MT
    Registered: 1/24/2013
    Posts: 1,114

    Does anyone have a source for a small male distributor cap?

    I am looking to convert a Duraspark distributor from the wider cap to the narrower cap. I realize an old-school points distributor cap will fit on a Duraspark ignition. However, I don’t want to change the spark plug wires. So I’m looking for a replacement cap that would fit on an old-school distributor, but has male prongs instead of female prongs.

    If it isn't broken...modify it anyway! http://www.DazeCars.com https://galaxieforum.boardhost.com
     

    12/10/2023 4:48 PM  #2

    Greg B
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,560

    Re: Does anyone have a source for a small male distributor cap?

    I do believe this is what you are looking for.  You can probably use that number to find some cross references.
    https://www.summitracing.com/parts/sum-g5239/make/dodge

    If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     

    12/10/2023 5:17 PM  #3

    Daze
    Forum Moderator & Bash host 2011

    Offline

    From: Kalispell MT
    Registered: 1/24/2013
    Posts: 1,114

    Re: Does anyone have a source for a small male distributor cap?

    Thanks but according to the listing "These will also fit OEM Mopar V8 distributors"  no mention of Ford anywhere on the listing and every compatibility is for a Chrysler product

    If it isn't broken...modify it anyway! http://www.DazeCars.com https://galaxieforum.boardhost.com
       •Thread Starter
     

    12/10/2023 6:14 PM  #4

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,359

    Re: Does anyone have a source for a small male distributor cap?

    I think Greg is correct ... original application is an IH distributor.
    https://www.napaonline.com/en/p/ECHAL162

    Last edited by 50vert (12/10/2023 6:26 PM)

    "Those telephone poles were like a picket fence"
     

    12/10/2023 7:59 PM  #5

    Greg B
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,560

    Re: Does anyone have a source for a small male distributor cap?

    AMC and Some Mopar distributors use the same early Ford cap.

    If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     

    12/10/2023 8:44 PM  #6

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,063

    Re: Does anyone have a source for a small male distributor cap?





    I ran across this in HAMB as well as VMF too.

    https://www.jalopyjournal.com/forum/threads/small-ford-distributor-cap.792975/

    https://www.vintage-mustang.com/threads/hei-distributor-cap-for-point-style-distributors.656692/

    HAMB is where I initially found this.

    Last edited by Nos681 (12/10/2023 8:57 PM)

     

    12/10/2023 9:40 PM  #7

    Daze
    Forum Moderator & Bash host 2011

    Offline

    From: Kalispell MT
    Registered: 1/24/2013
    Posts: 1,114

    Re: Does anyone have a source for a small male distributor cap?

    Greg B wrote:

    AMC and Some Mopar distributors use the same early Ford cap.

    I HAD NO CLUE!!  That is going to make it into a YouTube video.  Thanks


    Nos681 wrote:

    I ran across this in HAMB as well as VMF too.

    https://www.jalopyjournal.com/forum/threads/small-ford-distributor-cap.792975/

    https://www.vintage-mustang.com/threads/hei-distributor-cap-for-point-style-distributors.656692/

    HAMB is where I initially found this.

    Thanks for the info, I really appreciate it.  I both love and hate rockauto. 😂😂 Fantastic pries for the parts but a lot of times the shipping is where they get you.  I found an Amazon option and got it ordered.

    Thanks everyone for the help!!
     

    If it isn't broken...modify it anyway! http://www.DazeCars.com https://galaxieforum.boardhost.com
       •Thread Starter
     

    12/10/2023 10:45 PM  #8

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 11,737

    Re: Does anyone have a source for a small male distributor cap?

    I wish I had found that. I already bought wires for my standard size female type cap. Would have preferred those.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    12/11/2023 10:05 AM  #9

    RPM, aka Bearing Bob
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,256

    Re: Does anyone have a source for a small male distributor cap?

    What's the attraction for the male end cap? Does it provide a better fit/connection than the female? I bought a male cap a few years ago for a Duraspark distributor but never made the swap. The smaller cap fits fine when you remove the adapter.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    12/11/2023 10:32 AM  #10

    Daze
    Forum Moderator & Bash host 2011

    Offline

    From: Kalispell MT
    Registered: 1/24/2013
    Posts: 1,114

    Re: Does anyone have a source for a small male distributor cap?

    RPM, aka Bearing Bob wrote:

    What's the attraction for the male end cap?

    Simple, I want to change cap to the smaller one but not be required to change the plug wires as well.
     

    If it isn't broken...modify it anyway! http://www.DazeCars.com https://galaxieforum.boardhost.com
       •Thread Starter
     

    12/11/2023 12:52 PM  #11

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 11,737

    Re: Does anyone have a source for a small male distributor cap?

    I prefer the positive fit of the plug wires on the male cap.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Does anyone have a source for a small male distributor cap?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.