FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 5.0 Distributor - what have I got?

    • 1 of 1

       

    12/30/2023 5:53 PM  #1

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,549

    5.0 Distributor - what have I got?

    I was given this distributor as an auction item for our club’s annual banquet. Not sure what I have here. It looks to be new or remanned. It has the ignition module on it. It seems by the module is used on 83-93 5.0’s. The distributor number seems to be for 85-93 5.0’s. Does this have a steel or cast iron gear? Trying to figure on an auction value for this.





    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
     

    12/30/2023 6:10 PM  #2

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,787

    Re: 5.0 Distributor - what have I got?

    Steel gear with a roller cam sooooo after 85 it 'should' be steel. (unless......it's a truck distrib that still used FT cams for a few more years)  Thx Henry !
    Look at it and you can tell.  Cast arn  is a bumpy/pimpley finish  Steel has a slicker finish.
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    12/30/2023 6:24 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,189

    Re: 5.0 Distributor - what have I got?

    Gear looks fully machined like a steel gear.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    12/30/2023 7:42 PM  #4

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,549

    Re: 5.0 Distributor - what have I got?

    Thanks - steel gear then - what might it be worth as an auction price? Ballpark?

    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
       •Thread Starter
     

    12/31/2023 8:41 AM  #5

    John Ha
    I FYI 24-7

    Offline

    From: Mitchell, SD
    Registered: 4/02/2013
    Posts: 909

    Re: 5.0 Distributor - what have I got?

    They're around $150 if you buy reman.  The truck ones I looked at all had cast iron gears.  The Mustang units have steel gears.  Dunno if that helps but could be fodder for the auctioneer to use.

    Founding Member of the Perpetually Bewildered Society
     

    12/31/2023 1:36 PM  #6

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,549

    Re: 5.0 Distributor - what have I got?

    John Ha wrote:

    They're around $150 if you buy reman.  The truck ones I looked at all had cast iron gears.  The Mustang units have steel gears.  Dunno if that helps but could be fodder for the auctioneer to use.

    Thanks John - that and the fact that it has the ignition module makes it worth a lot more.

    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  5.0 Distributor - what have I got?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.