FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Proper way to keep VIN when replacing Inner Fender

    • 1 of 1

       

    5/21/2024 7:10 PM  #1

    Brian
    FYI FORD Member

    Offline

    From: Fort Worth, TX
    Registered: 7/29/2022
    Posts: 36

    Proper way to keep VIN when replacing Inner Fender

    I am replacing the inner fenders on my 67 and wondering what the best/legal way to transfer the VIN to the new panels is. Unfortunately, I don't have a dash VIN, as I believe that started in 68, so the inner fender VINs are all I have for identification. Has anyone dealt with this maybe feedback from the Police or DMV?

     

    5/21/2024 7:32 PM  #2

    Texas!
    FYI Addict

    Offline

    Registered: 6/27/2014
    Posts: 231

    Re: Proper way to keep VIN when replacing Inner Fender

    Use a cut-off wheel or jig saw to cut them out and then weld them into the new inner fender. It's entirely legal.

     

    5/21/2024 7:35 PM  #3

    Brian
    FYI FORD Member

    Offline

    From: Fort Worth, TX
    Registered: 7/29/2022
    Posts: 36

    Re: Proper way to keep VIN when replacing Inner Fender

    Thanks, Texas! Easy enough.

       •Thread Starter
     

    5/22/2024 6:18 AM  #4

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,417

    Re: Proper way to keep VIN when replacing Inner Fender

    You should have a door tag for use with the DMV.  No one at the DMV ever lifted the hood on my '67; they went by the door tag.  Though, Texas! stated the correct method for transferring the inner fender stamp, and that's always nice to have for originality if nothing else.  If you don't have a door tag Marti Autoworks can make you one. 

    https://www.martiauto.com/index.cfm

     

    5/22/2024 7:58 PM  #5

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 873

    Re: Proper way to keep VIN when replacing Inner Fender

    I would check with your state's DMV.  I know in Illinois the law is different.  It is a criminal offense to "cut & paste" a VIN in Illinois.  We are required to contact the State Police, who will pay a visit to observe the VIN on the apron.  They will then prepare a State Police VIN tag and permanently affix it to the panel below the door latch, and then you can do what you please with the apron.

    The Illinois State Police are very aware that you can order a door plate with any data you choose, and also know that doors or door tags can easily be exchanged between cars, and treat the door tags as meaningless.

     

    5/23/2024 9:11 AM  #6

    Quicksilver
    FYI Addict

    Offline

    From: California Central Coast
    Registered: 9/22/2013
    Posts: 259

    Re: Proper way to keep VIN when replacing Inner Fender

    Isn't there usually two vin numbers on the left and right side of the aprons? The passenger side is concealed by the actual fender. They should be the same numbers on them.  Mine was double stamped on both sides. Like the stamper dude didn't think it stamped good enough the first time so he stamped it again. Got pictures of the placement of th i.d's some place I will look for them.

    Money can't buy happiness. Butt it can buy Car Parts... and that is pretty much the same thing.67 FastBack
     

    5/23/2024 11:44 AM  #7

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Re: Proper way to keep VIN when replacing Inner Fender

    Texas! wrote:

    Use a cut-off wheel or jig saw to cut them out and then weld them into the new inner fender. It's entirely legal.

    Are you 100% sure about this in Texas?

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    5/23/2024 8:40 PM  #8

    Texas!
    FYI Addict

    Offline

    Registered: 6/27/2014
    Posts: 231

    Re: Proper way to keep VIN when replacing Inner Fender

    MS wrote:

    Texas! wrote:

    Use a cut-off wheel or jig saw to cut them out and then weld them into the new inner fender. It's entirely legal.

    Are you 100% sure about this in Texas?

    Absolutely. It is only illegal to transfer a VIN from one vehicle to another vehicle. A replacement inner fender is not another vehicle.
     

     

    5/23/2024 9:12 PM  #9

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Re: Proper way to keep VIN when replacing Inner Fender

    Texas! wrote:

    MS wrote:

    Texas! wrote:

    Use a cut-off wheel or jig saw to cut them out and then weld them into the new inner fender. It's entirely legal.

    Are you 100% sure about this in Texas?

    Absolutely. It is only illegal to transfer a VIN from one vehicle to another vehicle. A replacement inner fender is not another vehicle.
     

    Is that your opinion, or a legal fact?

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    5/23/2024 9:19 PM  #10

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: Proper way to keep VIN when replacing Inner Fender

    MS wrote:

    Texas! wrote:

    MS wrote:


    Are you 100% sure about this in Texas?

    Absolutely. It is only illegal to transfer a VIN from one vehicle to another vehicle. A replacement inner fender is not another vehicle.
     

    Is that your opinion, or a legal fact?

    Glen Buzek is the man that could answer this.
     

    Its really me....I fixed my caps lock .
     

    5/24/2024 6:39 AM  #11

    Texas!
    FYI Addict

    Offline

    Registered: 6/27/2014
    Posts: 231

    Re: Proper way to keep VIN when replacing Inner Fender

    MS wrote:

    Texas! wrote:

    MS wrote:


    Are you 100% sure about this in Texas?

    Absolutely. It is only illegal to transfer a VIN from one vehicle to another vehicle. A replacement inner fender is not another vehicle.
     

    Is that your opinion, or a legal fact?

    Every county in Texas has a representative of the Auto Theft Task Force who goes to the court house on certain days and clears up title issues. Find out when yours will be at the court house and ask him personally like I did. He even verified that a Dynacorn body shell is sold as a "replacement part" and he would authorize a title using the VINs from my rusted out '66 fastback when I showed him "substantial progress" in rebuilding the car.

     

    5/24/2024 7:55 AM  #12

    Quicksilver
    FYI Addict

    Offline

    From: California Central Coast
    Registered: 9/22/2013
    Posts: 259

    Re: Proper way to keep VIN when replacing Inner Fender

    Interesting, I always thought that Dynacorn bodies  came with their own updated vin. numbers on each body that they made.

    Money can't buy happiness. Butt it can buy Car Parts... and that is pretty much the same thing.67 FastBack
     

    5/24/2024 8:22 AM  #13

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Re: Proper way to keep VIN when replacing Inner Fender

    Quicksilver wrote:

    Interesting, I always thought that Dynacorn bodies  came with their own updated vin. numbers on each body that they made.

    Yeah.  If that isn’t illegal, it sure ought to be. I can see replacing the VIN on the car it came on, but a dynacorn body is just outright fraudulent

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    5/24/2024 10:13 AM  #14

    Texas!
    FYI Addict

    Offline

    Registered: 6/27/2014
    Posts: 231

    Re: Proper way to keep VIN when replacing Inner Fender

    Dynacorn bodies are sold as a "replacement part" and do not have a VIN so they are not a vehicle. Like I said, ask your local Auto Theft Task Force officer. Or look at Dynacorn's website in this link.
    https://dynacornclassicbodies.com/faqs/

     

    6/20/2024 11:44 AM  #15

    Bolted to Floor
    Senior 24-7 FYI Addict

    Offline

    From: Houston, Texas
    Registered: 4/01/2013
    Posts: 2,011

    Re: Proper way to keep VIN when replacing Inner Fender

    Yes, the dash VIN started in 68. The safest bet is to check with the DMV and see what they have to say.
     
    Anyone that wants to see the VIN on my car has to pop the hood. The door tag was removed for body work and the rivets don’t hold it on very well. So, it’s tucked safely away in a draw. Haven’t had any issues getting it inspected since 2018. I cut out the battery apron about 1989 and lost that VIN. Didn’t know any better at the time of the significance.
     
    Good welding and grinding skills can have them moved into the new apron and you would have to X-ray it to know it was done…… goes back to how legal…. The downside to this is if you don’t clean/blast, paint, and detail the rest of the engine compartment, then it will be as easy to spot as Coupedaddy’s Orange ride….. I do like that color.
     
    I see no reason why the new / old aprons can’t be sectioned to allow the VINs to remain. It could be cleaned up well enough to not look like a hack job or draw too much attention.
     

     

    John  -- 67 Mustang Coupe 390 5 speed
     

    6/20/2024 1:23 PM  #16

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,936

    Re: Proper way to keep VIN when replacing Inner Fender

    I have no vin stamping on me 68. I know I didn’t replace that fender apron and it doesn’t have the witness marks of being done previously. I did replace the rear left apron ,seems the brake fluid rotted it away.
    All other aprons are to the best of my inspection seem original.
    The vin on the dash and the door tag match.
    I wonder if there are more cars out there like that?

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    6/20/2024 4:31 PM  #17

    Rufus68
    I FYI 24-7

    Offline

    From: Knoxville, TN
    Registered: 4/26/2017
    Posts: 865

    Re: Proper way to keep VIN when replacing Inner Fender

    Rudy, I also have a '68.  A couple of weeks ago I was looking up in the passenger wheel well while attaching the battery tray and I spotted a VIN stamped in the inner fender towards the front of the wheel well.  This stamping is covered by the fender so it can not be seen from above.  Before seeing this, I didn't know I had a hidden stamped VIN.

    1968 T-code Coupe with a 302.  Nice car, no show stopper for sure, but I like it.
     

    6/21/2024 8:40 AM  #18

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,936

    Re: Proper way to keep VIN when replacing Inner Fender

    I have had the fenders off a couple of times and did not see any stamping , weird.

    Last edited by Rudi (6/21/2024 9:21 AM)

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    6/21/2024 11:14 AM  #19

    Rufus68
    I FYI 24-7

    Offline

    From: Knoxville, TN
    Registered: 4/26/2017
    Posts: 865

    Re: Proper way to keep VIN when replacing Inner Fender

    I've also had both fenders off and didn't notice it from above.  The way my flashlight was shining made the VIN stamping stand out from below.

    1968 T-code Coupe with a 302.  Nice car, no show stopper for sure, but I like it.
     

    6/21/2024 5:56 PM  #20

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,558

    Re: Proper way to keep VIN when replacing Inner Fender

    We had a 70 Maverick that we drag raced, while taking off all the undercoating, we found the VIN number stamped near the top of the transmission tunnel.  I have no idea if this was 'universal' across the Ford line.  

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Proper way to keep VIN when replacing Inner Fender

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.