| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Thanks Dan for your time and effort.
Offline
Nos681 - Dan, thnks for this post. I received Toyota headlight conversion kit and test fit the lights and am happy they fit w/o any modifications needed to the housing. As I already had installed a separate circuit breaker and realys for the headlights, this conversion couldn't be simpler.
Note: the kit comes with 55 watt H4 bulbs, one can purchase 80 watt bulbs if they want a brighter 'experience'.
Offline
I did for get to mention that both H4 conversion bulbs are made out of glass.
Hella lenses are curved.
Koito lenses are flat.
Offline
Just received this ad on LED headlight conversion bulbs ... in case anyone is interested.
Offline
BobE wrote:
Just received this ad on LED headlight conversion bulbs ... in case anyone is interested.
Just adding a comment from my experience - I've not had good results with those LED H-series replacement lamps. The few I've tried did not work properly with the reflector and lens used for the filament lamps. The ones I tried required a fairly large adjustment to get the light where it was supposed to be. Once that was done, they had a good cutoff but there was no significant difference between the high beam light pattern and the low beam light pattern. I believe that's because the LED emitter locations and configuration are not the same as those for the filaments in the incandescent bulbs, so the light output pattern is not consistent with that of the filament bulbs.
Last edited by John Ha (9/27/2024 8:04 AM)
Offline
John Ha - good info, thanks for the feedback.
Offline
I will put a set in mine it wasnt a lot more for 2 sets after shipping so I have 2 sets now lol.
Offline
anybody installed them yet?
Offline
Billy…post #50
Already did some night driving with great lighting.
I’m over 1600 miles from home.
Last edited by Nos681 (10/08/2024 10:47 PM)
Offline
Offline
I have installed the Toyota Kit H4’s, and need to adjust the beams (as I should have done with the OEM bulbs), H4’s are brighter.
As I had previously installed relays and a circuit breaker for the headlights, I didn’t use any of the wiring that came with the Toyota kit.
The $16 for the kit and $10 for shipping is worth it, IMO.
Offline
I don't need the kit for my current car; but, with all the good reviews and price I ordered one set for the future. Thanks guys
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |