FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Looking for a 1965 Shelby front valence that uses bumper.....

    • 1 of 1

       

    5/03/2025 8:35 PM  #1

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,594

    Looking for a 1965 Shelby front valence that uses bumper.....

    I wish I could run across info on where the venders get them cause they all look like the use the same picture but.....the prices are all over the place especially the shipping on some anywhere from free shipping to 100.00 more over the price of the Valence. Thinking about just ordering it from CJ Pony they use Dynacorn .

    Its really me....I fixed my caps lock .
     

    5/04/2025 5:54 AM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,658

    Re: Looking for a 1965 Shelby front valence that uses bumper.....

    When in doubt find out the actual manufacturer.  I've been please with the Dynacorn stuff I've bought. 

     

    5/06/2025 6:04 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,437

    Re: Looking for a 1965 Shelby front valence that uses bumper.....

    I have looked at a Dynacorn fiberglass shelby hood and a dynacorn 69 hood scoop in fiberglass. Their glass stuff is all garbage, in my opinion. Their stamped steel parts seem to be pretty good, but their steel hoods are bowed up on the sides. I can spot one on a Mustang from across the parking lot.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    5/06/2025 10:33 PM  #4

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,594

    Re: Looking for a 1965 Shelby front valence that uses bumper.....

    MS wrote:

    I have looked at a Dynacorn fiberglass shelby hood and a dynacorn 69 hood scoop in fiberglass. Their glass stuff is all garbage, in my opinion. Their stamped steel parts seem to be pretty good, but their steel hoods are bowed up on the sides. I can spot one on a Mustang from across the parking lot.

    I have already bought a bolt on Shelby hood scoop and the Shelby side scoops..still undecided about the front valence.
     

    Its really me....I fixed my caps lock .
       •Thread Starter
     

    5/08/2025 5:39 PM  #5

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,923

    Re: Looking for a 1965 Shelby front valence that uses bumper.....

    https://www.npdlink.com/product/front-valance-panel-r-model/142766?backurl=search%2Fproducts%3Fsearch_terms%3DShellby%252Bfront%252Bvalance%26top_parent%3D200001%26year%3D

    NPD (National Parts Depot)......Front valance like I have !
    Used with front bumper and turn signals...
    Coupla Hundred bucks !
    IF you have already paint your Mustang this will need painted to match.
    Mine fit OK butt that was YEARS AGO when I put it on.
    (SOLVED my heating problems and looks COOL too !)
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    5/09/2025 10:05 PM  #6

    McStang
    I FYI 24-7

    Offline

    From: Benicia, CA
    Registered: 4/01/2013
    Posts: 502

    Re: Looking for a 1965 Shelby front valence that uses bumper.....

    Maier racing has been a reliable supplier of quality fiberglass for many years. Not cheep necessarily but… I have Maier hood, front valance (racing style with front bumper), close fit front and rear bumpers on my 66. Pics are before front bumper installed, it’s paint matched like the rear. Fit on all parts is nice.





    (Pinto!)
     

    5/09/2025 11:31 PM  #7

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,265

    Re: Looking for a 1965 Shelby front valence that uses bumper.....

    McStang wrote:

    Maier racing has been a reliable supplier of quality fiberglass for many years. Not cheep necessarily but… I have Maier hood, front valance (racing style with front bumper), close fit front and rear bumpers on my 66. Pics are before front bumper installed, it’s paint matched like the rear. Fit on all parts is nice.





    I agree.  I have had Maier Racing front valence and both bumpers for years.  Fit is fine except that the bumpers are a little smaller than stock.
    Right now I can't upload photos even though they can be uploaded in the app.  Go figure.



     

    Original owner - 351w,T-5, 4whl disks, power R&P
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Looking for a 1965 Shelby front valence that uses bumper.....

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.