FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/19/2026 1:05 PM  #1


Anyone want to help in my latest quest

What I am up to is making a custom air cleaner for my galaxie engine that just says "different"

I'm converting the air cleaner to have two intake ports.  Kind of like an 84 dual snorkel air cleaner if you will.   This is nothing new or expirimental.  Dodge made a dual snorkel air cleaner, and Chebby made one as well.   That said, what I'm looking for is something like this: 

https://www.oreillyauto.com/detail/c/nickson/nickson-exhaust-adapter-2-1-4-inch-90-degree-flat-flare/nic0/544314?q=Nickson+exhaust+adapter+2+1%2F4%22

I bought two of these to serve as my snorkels.  However what bugs me about them is they have the expansion. 

If anyone knows of a place where one could get a pipe with the 90 degree flare, but no expansion step up, I'd be very thankful.   I'm willing to use what I got, but I really think straight pipe would look better.  Or maybe an exhaust shop that can make 90 flares like this....  I've searched and have come up empty.

It will kind of look like this but with two removable snorkels.  This one is from a 1962 Galaxie, before emissions  and the heat riser.
https://www.ebay.com/itm/137793475012?_skw=1962+ford+galaxie+air+cleaner&itmmeta=01M7TK05EYCG3AAH1AKRE4DJ13&hash=item20152191c4:g:OBwAAeSwASdqu82h&itmprp=enc%3AAQALAAABACHNgUiiE%2FjQhlDTaMiAde9oH1M%2FYxz%2BQJ7L12V1EZPzLH6KsVAiGnUzm%2FbgYX47nO35wNmRhHIOxaLWsK3mkcmTOEjt6qCvvgrS9vMn227HK4VLlt3X7BGSCWzyv188qkBG%2FOwS2C7Ockx%2FUq%2Fl5uHgtW--60YiZU18cOu7reSJp2tviHEJDQ7Ybt%2FbzOUR%2BQrlCDQ6YNvFNaEmpdwmZY34dC30qmnaKw9W9wN9hFbdqKQIEvK83It52pQG9P9s5W%2FiGAffgYUTbsXKYQdrgsOGhqOzykPI8FcKD0CUCtyyWAeYIt4n55CkBxmsdclYfbu%2FWvrEDq5oQp59crovKHA%3D%7Ctkp%3ABk9SR_LXgNO-aA

Edit:  I don't know why I didn't think of it earlier, but I emailed Nickson.  I will see what they say it they answer.

Last edited by Greg B (11/19/2026 1:40 PM)


If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
 

11/19/2026 1:48 PM  #2


Re: Anyone want to help in my latest quest

I would just cut the flared part off with a cutoff wheel.  If it needs to be longer just get the appropriately sized pipe and weld it to the stub with the 90 degree flare on it.  You could dress the weld to make it invisible. A little filler, primer and paint and no one would likely know, even if the welds weren't all that great.  

 

11/19/2026 1:57 PM  #3


Re: Anyone want to help in my latest quest

Vibrant makes a plethora of tubing products including oval, in stainless and mild steel.
https://share.google/UG3r2aKisvrtDOqQ5


Bob. 21.5 freeway MPG 69 Mach 1, 5.0 GT40P heads, SMOD Toploader, Armstrong  steering, factory AC
 

11/19/2026 3:56 PM  #4


Re: Anyone want to help in my latest quest

TKOPerformance wrote:

I would just cut the flared part off with a cutoff wheel.  If it needs to be longer just get the appropriately sized pipe and weld it to the stub with the 90 degree flare on it.  You could dress the weld to make it invisible. A little filler, primer and paint and no one would likely know, even if the welds weren't all that great.  

I actually thought about doing that.  Other than being a pain, I wondered how the scarred up inner pipe would disrupt airflow.  Probably negligible, but not worth it if I could find flared straight pipe.

And oddly enough, I also thought of 3d printing some snorkels, and the drawback to that is vibration and heat under the hood.   

The current length of the Nickson pipe satisfies what I'm looking for, I hope they tell me they can provide those skipping the expansion. 
 


If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     •Thread Starter
 

11/19/2026 4:17 PM  #5


Re: Anyone want to help in my latest quest

Greg B wrote:

TKOPerformance wrote:

I would just cut the flared part off with a cutoff wheel.  If it needs to be longer just get the appropriately sized pipe and weld it to the stub with the 90 degree flare on it.  You could dress the weld to make it invisible. A little filler, primer and paint and no one would likely know, even if the welds weren't all that great.  

I actually thought about doing that. Other than being a pain, I wondered how the scarred up inner pipe would disrupt airflow. Probably negligible, but not worth it if I could find flared straight pipe.

And oddly enough, I also thought of 3d printing some snorkels, and the drawback to that is vibration and heat under the hood.

The current length of the Nickson pipe satisfies what I'm looking for, I hope they tell me they can provide those skipping the expansion.
 

The disruption to airflow would be too small to be of any significance.  If you're that concerned about it you could dress the welds inside the pipes as well using a grinder and/or flap wheel with an extension if necessary.  I agree that if a part matching the criteria can be found that's definitely the best solution.  I think I'd stick with metal on this too.  Plastic long term will get brittle and can crack and fail.  

 

11/19/2026 6:00 PM  #6


Re: Anyone want to help in my latest quest

Is it possible to have a muffler shop expand the small diameter to match the larger diameter?

Not sure if this would make the 90 degree flange too large for the air cleaner housing.

Or could the larger diameter be squeezed back down to the smaller diameter?

Last edited by Nos681 (11/19/2026 6:02 PM)

 

11/19/2026 9:55 PM  #7


Re: Anyone want to help in my latest quest

I had one on my 70 fastback when I was 20. The inlets were 2 or 3” long and a formed a belled flange on the ends by working them with a ballpeen hammer and a file.  Looked pretty cool.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

Yesterday 7:58 AM  #8


Re: Anyone want to help in my latest quest

I always liked the 1950’s Cadillac/Oldsmobile air cleaner housing with two air inlets on either side of the air cleaner, just saying.  (Check out Speedway Motors)


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

Yesterday 12:26 PM  #9


Re: Anyone want to help in my latest quest

I really thought about it last night how I could incorporate that step up expansion in the pipe and it not look stupid.  So inspired, I came down this morning and took a few measurements.   I came up with this...

From this:


To this:


Now that I got me something I can live with, I got to hunt me some more parts.  I hated like heck busting up that piece of unobtanium just for that bracket, but sometimes you gotta do what you gotta do.  (I tried selling it on marketplace!)

This turned out easier.  I'm going to clean it up, and spot weld it to the bracket.


If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     •Thread Starter
 

Today 6:24 AM  #10


Re: Anyone want to help in my latest quest

This is sort of unresponsive to what your asking but there are ready-made alternatives out there for what I think you want (something unique)  For example, how about something like this - available from Speedway Motors?


The early 1960's Pontiacs also had 2 inlet air cleaners.  The ones for the tripower cars are reproduced but you'd need to alter the carb interface to use one on a 4-barrel.  Might not be all that hard.


And I'm sure I've seen dual snorkle cleaners on early Ford products as well (the ones I recall look like the Ponitac unit but the inlets are clocked farther apart) but could not find an example, other than the one for the 64 Thunderbolt.

Last edited by John Ha (Today 6:35 AM)


Founding Member of the Perpetually Bewildered Society
 

Today 6:38 AM  #11


Re: Anyone want to help in my latest quest

I'd want to look at how the second one was put together to see if one of those inlets could simply be moved to spread them apart and the previous hole filled.  Seems a fairly straightforward way to get what you want with minimal fabrication.  

 

Today 9:25 AM  #12


Re: Anyone want to help in my latest quest

TKOPerformance wrote:

I'd want to look at how the second one was put together to see if one of those inlets could simply be moved to spread them apart and the previous hole filled.  Seems a fairly straightforward way to get what you want with minimal fabrication.  

 

Well, I bought another air cleaner last night so I now have a couple of options.   I will make my second inlet the exact same way I made that one, I can either cut a hole and use riv nuts but the contour is a little different, or I can cut out out that section and weld it in, so the contour around the upper bend match perfectly.   I'm on the fence if its worth it.   Most people walking by would probably never notice the slight differences in the radius and it still fits the overall theme of what I'm trying to do with this car.  And that is...

Low buck chuck in 1970 saw hemis and brand new camaros, and then used whatever he could find and off the shelf low buck parts in 1970.

And John, thank you for posting those.   Trust me, I looked at I don't know how many dual snorkel air cleaners from factory originals to aftermarket.   You'd be surprised at how many were made.  My theme for the engine is trying to make a small block look like a Thunderbird big block that was put into these Galaxies.  I'm not going to go this far, but I have researched enough that there are small block radiator surge tanks that are used on Cobras.

Last edited by Greg B (Today 9:35 AM)


If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     •Thread Starter
 

Today 10:16 AM  #13


Re: Anyone want to help in my latest quest

Greg B wrote:

TKOPerformance wrote:

I'd want to look at how the second one was put together to see if one of those inlets could simply be moved to spread them apart and the previous hole filled.  Seems a fairly straightforward way to get what you want with minimal fabrication.  

 

Well, I bought another air cleaner last night so I now have a couple of options. I will make my second inlet the exact same way I made that one, I can either cut a hole and use riv nuts but the contour is a little different, or I can cut out out that section and weld it in, so the contour around the upper bend match perfectly. I'm on the fence if its worth it. Most people walking by would probably never notice the slight differences in the radius and it still fits the overall theme of what I'm trying to do with this car. And that is...

Low buck chuck in 1970 saw hemis and brand new camaros, and then used whatever he could find and off the shelf low buck parts in 1970.

And John, thank you for posting those. Trust me, I looked at I don't know how many dual snorkel air cleaners from factory originals to aftermarket. You'd be surprised at how many were made. My theme for the engine is trying to make a small block look like a Thunderbird big block that was put into these Galaxies. I'm not going to go this far, but I have researched enough that there are small block radiator surge tanks that are used on Cobras.

Surge tanks were typically used when the radiator cap was not the highest point in the system.  It was done to allow the system to bleed, by the air being able to exit at the highest point (like a bleeder screw on a brake caliper).  The Cobras used them because of the way the radiator was mounted.  My '02 WRX has one for the same reason.  I think, when you need one, you need it.  Adding on to a system that doesn't actually need one may just introduce problems. Just a heads up.   
 

 

Today 12:53 PM  #14


Re: Anyone want to help in my latest quest

I found a picture that shows the difference in the contour and the welds that hold the internal air baffle.  It's just slight, but noticable.  If I decide to go the cut/ weld route, I will include the baffle.   First things first, I will make the other inlet then decide if it's good enough.  I did already map out the best way to cut it.  I think with a little practice, I can weld with that precision again.   


If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     •Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.