FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » If it ever warms up in Texas - - -

    • 1 of 1

       

    1/30/2014 9:19 AM  #1

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,789

    If it ever warms up in Texas - - -

    - -  this looks like fun. I wish they'd have this kinda stuff in my area.
    http://www.carsandparts.com/Articles/Mustang/News/fun-ford-weekend

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    1/30/2014 9:30 AM  #2

    DC
    Senior 24-7 FYI Addict

    Offline

    From: Marshall, MI
    Registered: 4/01/2013
    Posts: 1,235

    Re: If it ever warms up in Texas - - -

    Rudi,

    They are Great! I did one a few years ago at Norwalk Ohio at the dragstrip. Had a ball. They had a road course set up in the paddock and a lot of open time at the strip. Lots of neat cars showed up too. Looks like the one at Martin is not too far for you and in my back yard, I'll probably do it if I am not at another race. I used to work with an outfit called Basic Hydraulic in Welland, spent a lot of time there a few years back.

    Last edited by DC (1/30/2014 9:34 AM)

     

    1/30/2014 9:43 AM  #3

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,789

    Re: If it ever warms up in Texas - - -

    DC wrote:

    Rudi,

    They are Great! I did one a few years ago at Norwalk Ohio at the dragstrip. Had a ball. They had a road course set up in the paddock and a lot of open time at the strip. Lots of neat cars showed up too. Looks like the one at Martin is not too far for you and in my back yard, I'll probably do it if I am not at another race. I used to work with an outfit called Basic Hydraulic in Welland, spent a lot of time there a few years back.

     
    Thanks for the heads up on the one in Norwalk.
    Basic used to do a lot of work for the place I retired from, John Deere Welland works. Basic is now a division of Bosch Germany and my #2 son and grandson both work there, small world!

    Good work ain't cheap, Cheap work ain't good!   Simple Man
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  If it ever warms up in Texas - - -

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.