FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » HPDE at Pacific Raceways and The Ridge in WA

    • 1 of 1

       

    3/04/2014 5:12 PM  #1

    ponyboy66
    FYI FORD Member

    Offline

    From: Bothell, Washington
    Registered: 4/02/2013
    Posts: 79

    HPDE at Pacific Raceways and The Ridge in WA

    I started participating in HPDE last summer and plan on continuing this spring and summer. I also was at the Ride-n-Drive event which is part of Mustang RoundUp. Looking for any fellow Washingtooians who are planning on getting out on the track this summer.

    66 coupe 289 Weiand T5 3.40 disc brakes progressive coils Bilstein 4.5 leaf mid-eyes 1" front sway bar 16" wheels
     

    3/04/2014 9:03 PM  #2

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,410

    Re: HPDE at Pacific Raceways and The Ridge in WA

    Well, come to the Mustangs Northwest's General meeting on March 14th at 7:30 at North Seattle Community College and you can meet some. Hope to see you at the meeting.

    Ron Foster
    Vice President
    Mustangs Northwest

    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  HPDE at Pacific Raceways and The Ridge in WA

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.