| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Hi everyone I am restoreing 65 mustang coupe exterior raven black interior black Does anyone know if the interior painted surfaces were satin or gloss? Thanks
Offline
They were actually more flat than even satin. When I did mine I did it in semi-gloss. I don't even know if they had satin back in the early eighties when I did mine. I did it purposefully because I figured a little gloss would have more resistance to wear.
Offline
I used rustoleum #7777 satin black on mine. It took a couple of years for it to settle out at just about the right shade of flat. DEFINITELY NOT GLOSS!!!! Cars with glossy interior color are prone to be forever saved into my picture collection of BADLY MODIFIED MUSTANGS. Of course, that is only my opinion, and a few devalued cars makes the rest of them more valuable!
Offline
The page I read said semi gloss. But I prefer the look of satin I used sem satin black spray bomb.
Last edited by True74yamaha (4/03/2014 12:10 AM)
Offline
How do you get the textured part back once it has been worn down from time and useage?
Offline
You could try using filler and then before it's dry use a plastic bag to imitate it. I know sem use to make a product that made a finish like whats on the doors. I don't know if they still do
Offline
Mochaman wrote:
How do you get the textured part back once it has been worn down from time and useage?
Have you tried stripping off paint. Maybe many layers of paint help to hide the texture.
Offline
Just finished mine last night. Not glossy, texture still visible. I may have done something right the first time.
Offline
The texture on the doors is embossed into the metal. Usually the many repaints fills in the texture and to get it back the old paint must be stripped. I had mine soda blasted before I used a black epoxy primer under the correct rattle can color, Charcoal Black,available from NPD.
The charcoal black is not grey but black with a slight metalic in it and definately semi-gloss.
What ever you do don't sand them down ,that will remove the embossing forever.
Last edited by Rudi (4/03/2014 10:36 AM)
Offline
After chem stripping, a scuff with Scotch-Bright and a very light coat of primer, I used Krylon Satin Black. Matches the TMI black door panels perfectly and looks right. Also easy to touch up.
What ever you do...DO NOT sand the textured area.
BB
Offline
Mark Z wrote:
Just finished mine last night. Not glossy, texture still visible. I may have done something right the first time.
Mark, it looks like the perfect sheen. It appears to be a bit flatter than the semi-gloss I used, but it looks like a factory finish.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |