| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
What year did the cap change to the male connections at the top, will the newer cap and rotor fit the original style 1968 Autolite distributer?
Offline
They changed in the late 80's. You can either buy, or source from the yard the cap adapter. I picked one up from an early 90's lincoln with a 302. When you buy the rotor, get it for an 85 mustang. it will be taller and shaped like a triangle. Put that rotor and cap on your distributor and use the new style (fox mustang) plug wires.
When I checked, rockauto.com has all three parts you need. $20 for a good ccap and rotor and $5 for the adapter. All under 85 mustang 5.0.
BobN
Here is the cap and rotor with brass terminals:
Cap adapter:
Offline
Thang you - - - - thang you vera much!
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |