FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » 1966 Coupe for Parts

    • 1 2  Jump to

       

    8/21/2014 10:18 AM  #1

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    1966 Coupe for Parts

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

     

    8/21/2014 12:11 PM  #2

    Raymond_B
    Senior 24-7 FYI Addict

    Offline

    From: Fort Worth, TX
    Registered: 4/01/2013
    Posts: 1,163

    Re: 1966 Coupe for Parts

    Wish you were closer, I would love to find some decent OEM doors and/or fenders

     

    8/21/2014 12:33 PM  #3

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    Doors and fenders not very decent, so don't worry. They could make some good wall art.

       •Thread Starter
     

    8/22/2014 4:23 AM  #4

    BGrendell
    FYI FORD Member

    Offline

    Registered: 5/17/2014
    Posts: 22

    Re: 1966 Coupe for Parts

    Are you looking to sell the front spindles? I'm located in Florida

     

    8/22/2014 10:02 AM  #5

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    Have a pair dont see Ford part number on them. 60.00 for the pair plus any shipping fees.

       •Thread Starter
     

    8/23/2014 2:28 PM  #6

    jrobbins
    Active Member

    Offline

    Registered: 8/23/2014
    Posts: 3

    Re: 1966 Coupe for Parts

    Was this a disc or drum brake car?

    If disc I need some dust shields.

     

    8/24/2014 7:48 AM  #7

    gjz30075
    FYI Addict

    Offline

    Registered: 4/03/2013
    Posts: 184

    Re: 1966 Coupe for Parts

    Stick or automatice trans?

     

    8/25/2014 5:34 AM  #8

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    Car did have Drums all around, Car did have manual transmission

       •Thread Starter
     

    8/25/2014 6:13 AM  #9

    gjz30075
    FYI Addict

    Offline

    Registered: 4/03/2013
    Posts: 184

    Re: 1966 Coupe for Parts

    Jim, pm sent

     

    8/27/2014 5:41 AM  #10

    wsinsle
    Senior 24-7 FYI Addict

    Offline

    From: Belle Vernon, PA
    Registered: 4/01/2013
    Posts: 1,692

    Re: 1966 Coupe for Parts

    I'd be intrested in the dash gauges if working.

    If this forum can't fix it, it isn't broke.
     

    8/27/2014 6:57 AM  #11

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    I still have gauges, all gauges worked, the plastic bezel is pretty worn out. 100.00 plus shipping. I also have one that I rebuilt for my 66 coupe and replaced with 6 gauge set up. That one I would have to get 400.00 for.

       •Thread Starter
     

    9/03/2014 5:57 PM  #12

    mach1mark
    Active Member

    Offline

    From: Greenville SC
    Registered: 6/22/2014
    Posts: 8

    Re: 1966 Coupe for Parts

    Jim Bowie wrote:

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

    Jim,
    Im looking for a usable driver side door catch (the part inside the door that grabs the post). Undamaged, both springs present etc. Ive tried to get a repop door catch to work but something isnt right.
     

    Mark C ~ 1965 Coupe restomod-in-progress; 1970 Mach 1 (T-5 export)
     

    9/04/2014 6:38 AM  #13

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    I should have one or two of them, Unfortunately I will be out of commision for the next two weeks. I will let you know when I'm back.

       •Thread Starter
     

    9/12/2014 6:09 AM  #14

    MarkinSC
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 444

    Re: 1966 Coupe for Parts

    Jim Bowie wrote:

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

     
    Hi. I could use the starter relay, coil, ignition switch and bezel, headlight switch and bezel and harness connector.  I want to use them to test the flathead in the  1950 ford.  Thanks Mark.

    GET HER DONE BULLETBOB!!! ..
     

    10/01/2014 9:30 AM  #15

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    mach1mark wrote:

    Jim Bowie wrote:

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

    Jim,
    Im looking for a usable driver side door catch (the part inside the door that grabs the post). Undamaged, both springs present etc. Ive tried to get a repop door catch to work but something isnt right.
     

     All I could find was a set of Repops Sorry

       •Thread Starter
     

    10/01/2014 9:50 AM  #16

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    MarkinSC wrote:

    Jim Bowie wrote:

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

     
    Hi. I could use the starter relay, coil, ignition switch and bezel, headlight switch and bezel and harness connector.  I want to use them to test the flathead in the  1950 ford.  Thanks Mark.

     Here's what I have. Dont know what harness your looking for let me know. $50.00 plus shipping.

       •Thread Starter
     

    10/01/2014 9:57 AM  #17

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    Petal assembly $125.00 , I would think it should be no more than $25. to ship to 30075

       •Thread Starter
     

    10/01/2014 4:43 PM  #18

    gjz30075
    FYI Addict

    Offline

    Registered: 4/03/2013
    Posts: 184

    Re: 1966 Coupe for Parts

    Pm sent...

     

    10/02/2014 2:01 PM  #19

    TC&Sons
    FYI FORD Member

    Offline

    Registered: 10/02/2014
    Posts: 16

    Re: 1966 Coupe for Parts

    Jim Bowie wrote:

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

    Interested in those spindles as well if they are not spoken for. I'm in MN - could potentially pick them up.
    Also interested in any parts you might have to convert my 4 lug to 5.

    Thanks!
     

     

    10/03/2014 12:39 PM  #20

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    TC&Sons wrote:

    Jim Bowie wrote:

    Time to move on, Front and rear frame rails shot, New rear quarters installed poorly, just not worth it for me to redo. So if any one needs any thing let me know. Not looking to get rich.  Was a V8 car. Black interior. I think they put in 65 seat covers. Do have clean title for complete car. Located in Wis.

    Interested in those spindles as well if they are not spoken for. I'm in MN - could potentially pick them up.
    Also interested in any parts you might have to convert my 4 lug to 5.

    Thanks!
     

     I still have tie rods, drag link, and idler arm.Good for a driver, $75.  Also have Flamming river 16-1 steering gear box, About 2500 miles on it,$400.00, Quick steer pitman arm and Idler arm also about 2500 miles $75. 8" rear end assembly Stock gears I think they are 2.79 Had it in the car for trip from Wis to Montana for bash a few years ago.$75.00,  Also have 4.5 rear leafs, Grab a Track Mid eye maybe 1500 miles on them, Went to the standard eye springs $150.00

       •Thread Starter
     

    10/03/2014 2:10 PM  #21

    TC&Sons
    FYI FORD Member

    Offline

    Registered: 10/02/2014
    Posts: 16

    Re: 1966 Coupe for Parts

    Where are you located in WI, Jim?

     

    10/04/2014 8:10 AM  #22

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    Milwaukee

       •Thread Starter
     

    10/05/2014 9:44 AM  #23

    TC&Sons
    FYI FORD Member

    Offline

    Registered: 10/02/2014
    Posts: 16

    Re: 1966 Coupe for Parts

    Jim Bowie wrote:

    Milwaukee

    Ok, thanks. Was hoping you were closer. That's a pretty decent drive... I'll touch back if I think I want to drive over and grab some parts.

    Thanks again.

    -T.C.

     

     

    10/16/2014 5:13 AM  #24

    Jim Bowie
    FYI Addict

    Offline

    From: Mequon Wis
    Registered: 4/08/2013
    Posts: 257

    Re: 1966 Coupe for Parts

    The 66 coupe shell is gone, Looks like it might still have some life in it, as either a donor or base for complete rebuild. Still have a lot of odds and ends left, Black interior parts Front buckets and rear seats (in 65 upholstery) Flamming River steering gear box , Grab a Track 4.5 rear spring.

       •Thread Starter
     

    10/26/2014 7:48 AM  #25

    curtisboyte
    Active Member

    Offline

    Registered: 10/26/2014
    Posts: 7

    Re: 1966 Coupe for Parts

    do you have the heater box still with the car, im looking for a decent one. 

    http://1965mustangrestore.blogspot.com/2014/10/more-pics-in-barn.html
     

     

    1 2  Jump to

  • Index
  •  » Swap Meet
  •  »  1966 Coupe for Parts

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.