| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Plumming a 2000 mustang v6 master cylinder to a 1970 reproduction proportioning valve. I thought I knew how it went with the instructions for the proportioning supplied by MS. I read through some old threads and got a bit confused. On the 1970 proportioning valve, the port on top that ajoins the ports that go to the front brakes, does that go to the port on the master cylinder that is closest to the brake booster or the furthest away? thanks
Offline
The front brakes connect to the mc port closest to the brake booster.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |