| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
I'm quietly inventorying the interior of the FB, and I don't have the metal pieces that go above the interior quarter trim and below the upper pieces that have the vents.
Its about 1 1/4" wide and runs from the top of the door at the striker, all the way around the rear of the car, above the trap door.
Anyone have this, or can point me in the right direction, please?
Offline
Offline
TimC sent you a PM
'66 Fastback since July 1981. Springtime Yellow, originally a 200 cu in, 4 speed. Also a '92 LX Coupe, 5.0, 5 speed.
Offline
I have a pair of the fastback rear trim pieces. Only the two rear, not the side ones. In real nice shape.
$40 for the pair plus shipping if needed. email me steve@mustangsteve.com if interested
Offline
Steve, I got a set to darren at the Bash. It was missing the small aquare center piece. If you had one of those, that would make darren happy.
Offline
Yes it would. Sorry, I should have updated this post.
I'm still looking for the corner fiberglass pieces that flank the fold down....
Offline
I think that center piece is being reproduced now.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |