FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Cobra 1985 5.0 engine T-5 Borg Warner

    • 1 of 1

       

    10/21/2014 1:32 PM  #1

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Cobra 1985 5.0 engine T-5 Borg Warner

    I know this is a Mustang Site but they use T-5"s also can you help. I need aFlywheel and matching Clutch. So far i have been told that  Luk Lfw 111 Flywheel will work along with a Luk 07-005 Clutch set . has any one used this brand pdts which are from Germany. Is the same flywheel used on A c-5 tansmission or does it matter .I am told that the Luk lfw has various holes so as to use varies clutch sets IE: for  a 6 or 4 cyl engine . I appreciate any one familiar with using a T-5 that can help. 

     

    10/21/2014 7:09 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 11,743

    Re: Cobra 1985 5.0 engine T-5 Borg Warner

    I had good luck (no pun intended) with Luk clutches as stock replacements.  Not sure about the details you are talking about, but I know a four cylinder clutch is ALOT different than a V8 clutch.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Cobra 1985 5.0 engine T-5 Borg Warner

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.