FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » T-45

    • 1 of 1

       

    10/28/2014 7:21 AM  #1

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    T-45

    Does the T-45 have a removable bell hsg ? If so has any one used it on an eary 80's 5.0 with an adapter plate if necessary ?

     

    10/28/2014 9:14 AM  #2

    66fastback
    FYI FORD Member

    Offline

    From: Farmers Branch, TX
    Registered: 4/18/2013
    Posts: 46

    Re: T-45

    Nope.  All T45 transmissions have the bellhousing built into the transmission, which means it has the 4.6L bolt pattern.  I think it was Keisler that used to machine the fronts off these transmissions and set them up for a bell housing, but they are no longer in business.

    I have not personally seen anybody adapt one to a 5.0, but that does not mean that there is not some way out there to do it.

    ok, here is somebody making something to do it.

    http://www.thet45source.com/t45-bell-housing-adapter-kit.php

     

    Last edited by 66fastback (10/28/2014 9:15 AM)

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  T-45

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.