FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Tips and How-To's
  •  » How to Correctly Flare Stainless Steel Tubing - By Mach1_Ron

    • 1 of 1

       

    11/07/2014 3:28 AM  #1

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    How to Correctly Flare Stainless Steel Tubing - By Mach1_Ron

    http://fyi.boardhost.com/viewtopic.php?pid=28748#p28748
     

     

    1/07/2016 6:08 PM  #2

    Ray Hill
    Active Member

    Offline

    Registered: 8/15/2015
    Posts: 3

    Re: How to Correctly Flare Stainless Steel Tubing - By Mach1_Ron

    What would be a good radiator for a `64 Ranchero with a 351w? Also what would be a good master cylinder for the same vehicle with  disk/disk brakes? thanks, ray

     

     

    1 of 1

  • Index
  •  » Tips and How-To's
  •  »  How to Correctly Flare Stainless Steel Tubing - By Mach1_Ron

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.