FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Tie rod end and ball joint bushing.

    • 1 of 1

       

    12/02/2014 8:37 PM  #1

    bigtirefalcon
    Active Member

    Offline

    Registered: 12/03/2014
    Posts: 6

    Tie rod end and ball joint bushing.

    I have a 64 ford falcon 6 cyl. car with a 302 in it now, I got a set of spindle off a 64 falcon V8 car and I noticed the outer tie rod ends are bigger so are the ball joints bigger also and if so will these bushing work on a falcon?  If so what is the part # I need to order.      Thanks

     

    12/03/2014 7:09 AM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,082

    Re: Tie rod end and ball joint bushing.

    Please email me steve@mustangsteve.com.
    Ball joints should be he same size on those spindles.  Tie rods may appear different on the threads, but actual stud should be same.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Tie rod end and ball joint bushing.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.