FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » What's the proper name for those "doo-hickeys"........

    • 1 of 1

       

    5/24/2013 4:38 PM  #1

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,737

    What's the proper name for those "doo-hickeys"........

    that bolt the brake hose to the caliper. My hose has the banjo shaped fittings butt what do you call the bolt with a hole that holds it to the capillarys!
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    5/24/2013 4:57 PM  #2

    Hornman
    Senior 24-7 FYI Addict

    Offline

    From: Mansfield, Texas
    Registered: 4/01/2013
    Posts: 1,568

    Re: What's the proper name for those "doo-hickeys"........

    6sally6 wrote:

    that bolt the brake hose to the caliper. My hose has the banjo shaped fittings butt what do you call the bolt with a hole that holds it to the capillarys!
    6sal6

    The technical name for those bolts is : Banjo Bolts.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  What's the proper name for those "doo-hickeys"........

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.