FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    • 1 of 1

       

    3/01/2015 1:37 PM  #1

    Rebel Racing
    Active Member

    Offline

    Registered: 3/01/2015
    Posts: 8

    Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    Hi Guys,

         I have a set of seat track extenders that allow you to gain an extra 2" of leg room--great for tall or "bigger" drivers.  Direct bolt on in 5 min after your seat is out.  Made from cold rolled steel and feature grade 8 hardware.  $80 plus shipping.  Contact me at swc@odyssey.on.ca  You can check my Ebay feedback under my user name of  rebel-racing.

     

    3/17/2015 9:43 AM  #2

    almcgee
    I FYI 24-7

    Offline

    From: Fairview, Texas
    Registered: 6/01/2013
    Posts: 782

    Re: Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    Just installed the seat track extenders and they fit perfect.  In my opinion, they are very strong and do not overhang the back of the seat riser enough to notice.  They extend the seat back 2 inches as advertised and do give you more leg room and head room.  Heck, I should get a commission for any future sets sold.  I feel like I am making a commercial rather than reporting my experience.  Anyway, I would recommend them if this guy is a member of the forum. 

    Mustang Steve Bash in Gruene, Texas September29-30, 2023
     

    3/17/2015 9:48 AM  #3

    almcgee
    I FYI 24-7

    Offline

    From: Fairview, Texas
    Registered: 6/01/2013
    Posts: 782

    Re: Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    I did drill two holes 2 inches back from the original front holes in my seat riser to accomodate the original seat track bolts.  This allows the seat track extenders to sit flush on the floor of the seat riser. 

    Mustang Steve Bash in Gruene, Texas September29-30, 2023
     

    1/26/2016 9:22 PM  #4

    Eljarra
    Unregistered

    Re: Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    Hi, Im new to the board...I have a 65 Mustang Coupe Pro street, Im looking for seat extenders as I need the extra legroom. Not sure if the bracket holes are in the original position, what is the measurement between the original bolt holes, do you sell them in pairs ? thanks
     

     

    1/26/2016 9:51 PM  #5

    Rebel Racing
    Active Member

    Offline

    Registered: 3/01/2015
    Posts: 8

    Re: Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    Hi,

         I do sell them in pairs (to do both seats) and will offer discounted pricing in that case.  Email me directly at swc@odyssey.on.ca

    Steve,

       •Thread Starter
     

    1/30/2016 2:59 PM  #6

    gotstang
    FYI FORD Member

    Offline

    From: Woodstock Ontario Canada
    Registered: 4/01/2013
    Posts: 60

    Re: Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    I bought a set of these seat extenders from some one in London Ontario Canada a they work great  even on  My bench Seat in My 1966 Mustang Coupe  Lot more leg room now 

     

    1/31/2016 11:37 AM  #7

    Rebel Racing
    Active Member

    Offline

    Registered: 3/01/2015
    Posts: 8

    Re: Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    Thanks for the kind words.......I have a few more being done up this week if anyone is intrested.

     

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Seat Track Extenders 1964 1/2-1970 Mustangs (and some Cougars)

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.