FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » clutch cable from mustang steve replacement

    • 1 of 1

       

    3/25/2015 7:52 AM  #1

    junglecurry911
    Active Member

    Offline

    Registered: 2/04/2015
    Posts: 4

    clutch cable from mustang steve replacement

    1967 fb c code roller 302/t5
    Hi all,
    My clutch cable from mustang steve got caught on a header and burned up. i went to dallas mustang and got a 2000 mustang gt adjustable clutch cable to replace it(in a hurry to change it to get it on a trailer) . the pedal side nipple looks alot bigger than steve's . is this a problem..do i need to buy it from steve ? thanks guys

    ht   tp://tiny   pic.com/r/2wqeg   yo/8             (take out the spaces to see measurement)

    1967 fb c code roller 302/t5

     

    3/25/2015 5:10 PM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,829

    Re: clutch cable from mustang steve replacement

    You have to remove the big black rubber bushing, and grind the 4 tabs on the nylon guide smooth wiht the outside of the body.  I'm assuming being a '67 you have the adjustable mount at the firewall?

     

    3/26/2015 5:24 PM  #3

    junglecurry911
    Active Member

    Offline

    Registered: 2/04/2015
    Posts: 4

    Re: clutch cable from mustang steve replacement

    Hi Tko,

    Yes is the one with the adjustable mount on the firewall. Thanks for the tips. The end of the cable just looked a little bit bigger where it goes into the pedastal and was worried. 

       •Thread Starter
     

    3/28/2015 9:13 AM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,661

    Re: clutch cable from mustang steve replacement

    The ford racing e302 cable is same I use. I have replacements available, or the ford racing version works great.  Jusr remove that rubber grommet as TKOPerformance stated.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  clutch cable from mustang steve replacement

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.