I have had many years of experience fabricating kickdown rods and other unobtainable parts for nearly all the different Ford cars and trucks ranging from the 1963 to the 1986 model years.  All of my rods are made from STOCK  FORD templates, reproduced and have been verified by every first purchaser of a particular rod to fit the year, model, engine and transmission that it is described to fit.  No one else in the world is doing this.
What may be of particular interest to many members of this site is this. I have recently created a kickdown rod conversion kit for small block Ford Mustangs, Comet, Cyclone, and basically all Ford products that have an automatic transmission (Cruisomatic, C-3 and C-4....C-6 with FE engines is coming) and wish to convert to a kickdown rod and eliminate the clunky bellcrank/cable design on models prior to '68. The present kit is for all small blocks (260, 289, 302 and 351 that are coupled to any of the above transmissions)
I also make other parts that are no longer available and thus very hard to find.
You are welcome to come see my stuff on Ebay under "kickdownrodsgaloreandmore" or just search "kickdown rod" and anything in that category that you see made of stainless steel is made by me.....that's my "marque" as it were. Click on "see my other things" (or something like that) and my whole list of parts will appear. I presently have 44 different parts all total and 34 or so different kickdown rods all for Ford cars and Trucks. Check out my feedback while there. It speaks for itself. I am planning to build a website but have not as yet done so. You can email me at: kickdownrods@verizon.net  
John VH

Last edited by kickdownrod John (4/01/2015 6:00 PM)