FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Here is a variable rate spring like I have never seen before...

    • 1 of 1

       

    6/10/2013 3:01 PM  #1

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Here is a variable rate spring like I have never seen before...

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    6/10/2013 4:33 PM  #2

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: Here is a variable rate spring like I have never seen before...

    that on your vert??

     

    6/10/2013 6:35 PM  #3

    BTaylor
    FYI Addict

    Offline

    From: Carrabelle, FL
    Registered: 4/02/2013
    Posts: 125

    Re: Here is a variable rate spring like I have never seen before...

    I have seen that kind but normally on rock crawler suspension

    68 Cougar XR7 347 stroker T5 3:80
     

    6/10/2013 6:52 PM  #4

    Greg B
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,675

    Re: Here is a variable rate spring like I have never seen before...

    well, I can say I recognize a homer bucket when I see one.  

    If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     

    6/10/2013 7:46 PM  #5

    hmartin025
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 365

    Re: Here is a variable rate spring like I have never seen before...

    Hope theres more than that "yeller" bucket holding that car up?

     

    6/10/2013 8:45 PM  #6

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Re: Here is a variable rate spring like I have never seen before...

    The bucket is supporting the caliper so the hose does not get messed up.  This is on some kind of rice burner.  Looks like a cool idea.  If you are into the suspension hard, the weak spring stacks up and then the stiff one takes over.

    I was doing a search looking for a wheel stud removal tool and his post on a ricer forum popped up.  He showed how he used a Harbour Freight ball joint removal tool to push the studs out.  I went and bought the tool and will give it a try.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

    6/11/2013 4:33 AM  #7

    CraigMBA
    FYI FORD Member

    Offline

    From: Lemoore CA
    Registered: 4/12/2013
    Posts: 44

    Re: Here is a variable rate spring like I have never seen before...

    The small spring is a "tender spring" to keep the big spring under tension at full suspension droop.

    At ride height, the tender spring is fully compressed, but under droop (like if you jack up the car) it expands and keeps the spring from falling out of the bucket or making weird noises if you go over a rise in the road.

     

    6/11/2013 7:42 AM  #8

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Re: Here is a variable rate spring like I have never seen before...

    Thanks, Craig.  That sounds plausible.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

    6/11/2013 8:38 AM  #9

    Hornman
    Senior 24-7 FYI Addict

    Offline

    From: Mansfield, Texas
    Registered: 4/01/2013
    Posts: 1,568

    Re: Here is a variable rate spring like I have never seen before...

    MustangSteve wrote:

    I was doing a search looking for a wheel stud removal tool and his post on a ricer forum popped up.  He showed how he used a Harbour Freight ball joint removal tool to push the studs out.  I went and bought the tool and will give it a try.

    Be careful there Steve. I recently bought a set of HF suspension removal tools and quickly learned that they are cast not forged. I broke three of the five piece tool set in 30 min. Watch out for flying sharp metal pieces.

     

    6/11/2013 3:15 PM  #10

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,156

    Re: Here is a variable rate spring like I have never seen before...

    Thanks, Ron.  I bought the exact same tool shown in the picture.  ($19.99)  I had to open up the forked end of it maybe 0.030" to clear both sides of the head of the stud.  I was able to remove the studs quite easily.  It barely even stressed the tool at all.  Looks like it works very well as a stud remover.  As always, you should always wear safety glasses if any tools are getting stressed at all.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Here is a variable rate spring like I have never seen before...

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.