FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Rich bank 2 on 96 cobra mod engine

    • 1 2  Jump to

       

    6/18/2013 11:34 PM  #26

    65svt
    FYI FORD Member

    Offline

    From: east LOS ANGELES, CALIFORNIA
    Registered: 4/03/2013
    Posts: 74

    Re: Rich bank 2 on 96 cobra mod engine

    LCsteve if it was the HG wont i have low compression on cylinders? When i did the comp check i got good reading on all cylinders. Also the leakage test was good.

     

    6/19/2013 12:42 PM  #27

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,248

    Re: Rich bank 2 on 96 cobra mod engine

    The head gasket would only be blown on that cylinder not the others.  Compression might be adequate too.  What is happening is that suction as the piston goes down will suck the oil in.  Same as with valve guides, but you can't get that level of oil in the cylinder just thru a valve guide.

    Last edited by lowercasesteve (6/19/2013 12:45 PM)

    Original owner - 351w,T-5, 4whl disks, power R&P
     

     

    1 2  Jump to

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Rich bank 2 on 96 cobra mod engine

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.