FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Paint & Body
  •  » We did it this time and need advice

    • 1 of 1

       

    2/09/2016 6:23 PM  #1

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    We did it this time and need advice

    Replaced a 66 roof  which had a vinyl top and swiss cheese holes under neath First time for doing this .Alas the top of the windshield needs to have a half inch off the top or it won't go in The car has a beautiful white with blue stripes paint job on it now so no way can the top be re-positioned .  I need expert help here .

     

    2/09/2016 8:57 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,184

    Re: We did it this time and need advice

    My level of expertise on that is to start over and do it right.  The side windows are going to not fit either.

    You can get the roof repainted a lot easier than trimming a windshield or vent window frames and side glass.  Have you checked the rear window yet?

    Next time, measure everything about 43.5 times and make alignment measurements with marks about 6" apart on the A pillars so you can duplicate the correct dimensions.


    I would not even CONSIDER trimming a windshield to "fix" your problem.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    2/28/2016 7:26 PM  #3

    mrputz1
    FYI Addict

    Offline

    Registered: 3/15/2014
    Posts: 136

    Re: We did it this time and need advice

    Got a replacement rear glass(old one) and a new carlite windshield . the original rear glass was not mfg correctly but the replacement went no problem. The windshield was actually 3/8 of an inch shorter up and down and it fit also . after much angst problems solved  

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Paint & Body
  •  »  We did it this time and need advice

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.