FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Trying to add A/C to 88 5.0 with V belt pulleys.

    • 1 of 1

       

    3/03/2016 2:59 PM  #1

    daddy055
    Unregistered

    Trying to add A/C to 88 5.0 with V belt pulleys.

    I'm looking for engine crank pulley 4 bolt, 3  grooves for a/c, power steering, alternator. Also water pump pulley 2 groove v belt.

     

    3/03/2016 5:29 PM  #2

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: Trying to add A/C to 88 5.0 with V belt pulleys.

    You posted in the swap meet section........re-post in the Tech section.

    BTW: I checked what I have on hand but don’t have the pulley’s you’re looking for.....

    Last edited by josh-kebob (3/03/2016 10:11 PM)

     

    3/03/2016 8:49 PM  #3

    Mach1_Ron
    I FYI 24-7

    Offline

    From: Highland Village, Texas
    Registered: 5/28/2013
    Posts: 361

    Re: Trying to add A/C to 88 5.0 with V belt pulleys.

    I think I have them. I'll look tomorrow and let you know.

    "The OLDER I Get....The FASTER I Was..."
     

    3/04/2016 11:47 AM  #4

    Mach1_Ron
    I FYI 24-7

    Offline

    From: Highland Village, Texas
    Registered: 5/28/2013
    Posts: 361

    Re: Trying to add A/C to 88 5.0 with V belt pulleys.

    I have the crank pulley, but the water pump is a single groove..


     

    "The OLDER I Get....The FASTER I Was..."
     

    3/05/2016 8:17 PM  #5

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: Trying to add A/C to 88 5.0 with V belt pulleys.

    I have two of the water pump pulley’s.......both are two groove.

    One measures 5 5/16 across
    The other measures 5 3/4 inches....

    If you think either one will work, you can email me directly at: okstang@gmail.com and we can then work out the details.
     

     

    4/19/2016 6:51 PM  #6

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,078

    Re: Trying to add A/C to 88 5.0 with V belt pulleys.

    Note:  Early SBF crank pulleys have different offset than the 5.0 stuff. This is a function of the thickness of the harmonic balancer being different.  They can be put in a lathe and cut in two then rewelded.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Trying to add A/C to 88 5.0 with V belt pulleys.

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.