FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » looking for custom and unique wheel center caps

    • 1 of 1

       

    7/02/2013 8:12 AM  #1

    cougrnut
    FYI Addict

    Offline

    From: hershey
    Registered: 4/03/2013
    Posts: 194

    looking for custom and unique wheel center caps

    Does anyone know of a good vendor or machine shop for custom and unique wheel center caps? They don't necessarily have to be chrome or billet. Just so seeing what's out there and anyone's experiences?

     

    7/02/2013 12:24 PM  #2

    C9ZZ
    FYI Addict

    Offline

    From: Bossapolis, MN
    Registered: 4/01/2013
    Posts: 210

    Re: looking for custom and unique wheel center caps

    Not done yet, butt I'm using the thick flat center cap on my Torque Thurst Ds.  The plan is to use the old V on 8 on them.  I know a guy who does vinyl signs who can scan and make a mask for powder coat or cut them out in vinyl.  I even thought of 2 colors and making the V and 8 interlock.  This could be inexpensive.   It would be nice to have them CNC cut butt I'm no CNC guy.

    Volvo!
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  looking for custom and unique wheel center caps

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.