FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » Need a few things to convert my 69 I-6 c4 to a 5.0 t5

    • 1 of 1

       

    11/01/2016 9:55 AM  #1

    lalojamesliz
    Unregistered

    Need a few things to convert my 69 I-6 c4 to a 5.0 t5

    Hello guys, first post
    I already have a engine and trans from a doner 89 5.0 mustang.
    I need:
    trans swap cross member, engine to frame engine mounts, motor mounts, clutch pedal assembly, cable clutch or hydraulic clutch kit, shifter assembly and I'm sure I'm missing something. 
    Let me know if you have something I need. I'm in Bakersfield, CA and prefer to do local or close by but just let me know

     

    11/26/2016 6:32 AM  #2

    mark1965
    FYI Addict

    Offline

    Registered: 4/03/2013
    Posts: 172

    Re: Need a few things to convert my 69 I-6 c4 to a 5.0 t5

    I am removing a t5  from my 65 coupe going to auto I will have pedal Assembly hydraulic clutch setup cross member  and bjm short throw shifter if interested let me know . will  not be taking them out til January if you can wait . I also have a roll control kit that will be coming out as well.

     

    2/13/2017 5:22 PM  #3

    Flade
    Active Member

    Offline

    Registered: 2/13/2017
    Posts: 4

    Re: Need a few things to convert my 69 I-6 c4 to a 5.0 t5

    Mark,

    Did you remove the T5?  
     

     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  Need a few things to convert my 69 I-6 c4 to a 5.0 t5

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.