FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 68 Fog light conversion

    • 1 of 1

       

    7/09/2013 5:13 PM  #1

    687072mustang
    FYI Addict

    Offline

    From: Monroe WA
    Registered: 4/01/2013
    Posts: 173

    68 Fog light conversion

    An old (97) Mustang Monthly directs you to cut the standard grill round to match the fog lights. Was this the Ford, stock way for 68 with fog lights?? I have only seem a rectangular openings for them. Which is the original way? I would like to keep it as stock looking as possible.
    Thanks

     

    7/10/2013 7:05 PM  #2

    ultrastang
    I FYI 24-7

    Offline

    From: Camden, Arkansas
    Registered: 4/01/2013
    Posts: 570

    Re: 68 Fog light conversion

    687072mustang wrote:

    An old (97) Mustang Monthly directs you to cut the standard grill round to match the fog lights. Was this the Ford, stock way for 68 with fog lights?? I have only seem a rectangular openings for them. Which is the original way? I would like to keep it as stock looking as possible.
    Thanks

    The rectangular segments of the '68 grille are cut out around the fog lights, but the opening in the grille for the fog lights on the '68 are not circular.




    Right side.



    Left side.



    You can count the segments down and over to see which rows need cutting out.

    Last edited by ultrastang (7/10/2013 7:09 PM)

     

    7/11/2013 8:22 AM  #3

    687072mustang
    FYI Addict

    Offline

    From: Monroe WA
    Registered: 4/01/2013
    Posts: 173

    Re: 68 Fog light conversion

    Thank you. The  pictures a so good I will use them to count the vert and horz bars to position the lights. Thank you very much. just perfect as to what I was looking for.

       •Thread Starter
     

    7/11/2013 8:22 AM  #4

    687072mustang
    FYI Addict

    Offline

    From: Monroe WA
    Registered: 4/01/2013
    Posts: 173

    Re: 68 Fog light conversion

    Thank you. The  pictures a so good I will use them to count the vert and horz bars to position the lights. Thank you very much. just perfect as to what I was looking for.

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  68 Fog light conversion

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.