FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » I figgered out what to do with the seats I took out of my 65

    • 1 of 1

       

    7/23/2013 3:38 PM  #1

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,895

    I figgered out what to do with the seats I took out of my 65

    Instead of sitting in the boxes on a shelf I decided to put them to use in my shop.  so far the cost has been just the price of cutting wheels and paint.  I took an axle out of a 90 f150 that a friend was junking out and cut each end off and welded a swivel from an old bar stool.  I still have to come up with a set of rims that will fit the f150 bolt pattern as the wheel shown in the pic are stock mustang rims!!


    Last edited by terry (7/23/2013 3:39 PM)

    MSBB Host 2014 & 2022
     

    7/23/2013 6:40 PM  #2

    Novi Rick
    FYI Addict

    Offline

    From: Novi, Michigan
    Registered: 4/01/2013
    Posts: 148

    Re: I figgered out what to do with the seats I took out of my 65

    Very cool!  I'll take two!

     

    7/23/2013 7:15 PM  #3

    Tubo
    2008 BASH V Host

    Offline

    From: Ft. Walton Beach, Florida
    Registered: 4/01/2013
    Posts: 1,841

    Re: I figgered out what to do with the seats I took out of my 65

    Vera handsome there t.

    Tubo

    If it ain't broke, I haven't modified it Yet
     

    7/23/2013 7:39 PM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,688

    Re: I figgered out what to do with the seats I took out of my 65

    I like that!  I wish I had extra floorspace for stuff like that!

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    7/23/2013 8:41 PM  #5

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,895

    Re: I figgered out what to do with the seats I took out of my 65

    i would rather have used a peice of 1/4' plate steel to attach the seat, but the goal was to do this for next to nothing!!  
    Steve the solution to no floor space is to build on!!!!

    MSBB Host 2014 & 2022
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  I figgered out what to do with the seats I took out of my 65

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.