| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Been wanting to do a truck build. Bought a 2005 Crown Vic today. Already have a1970 F 250. Wanting to do the full frame swap.
Offline
Steve-G wrote:
Been wanting to do a truck build. Bought a 2005 Crown Vic today. Already have a1970 F 250. Wanting to do the full frame swap.
What did you have to give for the Crown Vic and what will you do with the carcass once you pull the front end out of it?
Offline
500 with no reverse. Scraping everything I don't need.
Offline
Very cool swap! They are certainly the hot swap going on now. Plenty of you tube how to vids on it. Good luck!
Offline
Steve-G wrote:
500 with no reverse. Scraping everything I don't need.
How will you scrap it considering it will no longer be rolling stock?
Offline
Post some pics and progress of your build.
Offline
boomyal wrote:
Steve-G wrote:
500 with no reverse. Scraping everything I don't need.
How will you scrap it considering it will no longer be rolling stock?
I once had a wrecker winch a old Plymouth Scamp with no wheels onto his flatbed, just threw a chain on it and dragged it on board.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |