| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
I have a 66 fastback and bought 16x8 vintage wheel works v40's with 4 1/2 backspace. I need to know what disc setup will fit. Surely someone has these wheels here or knows someone that does. I would really appreciate any help. I have gone to Mustang Steve's house and tried them on his COBRA front setup but they will not work. Thanks!
Offline
Check with JamesW-from the forum
He lives close to Waco, Ya might be able to see his car in person
Offline
I run 16x7 w/4.25 b/s. Brakes are Wilwood 12.19" rotors. I have about 1/16" clearence with either steel wheels or my MarkVII aluminum ones. That is with the 1/8" spacer that comes with the kit.
Most of us run max 7" front wheels on the early cars. 8"s usually rub the fender badly even with the lip rolled. I had to go down to a 215x55x16 to make mine fit. 225s flat did not work.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |