FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Part ID help please

    • 1 of 1

       

    7/29/2018 7:50 PM  #1

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 877

    Part ID help please

    Can you fine parts experts help me identify this part from a 66 coupe?  It's about 18" long.



    Over Memorial Day weekend there was a significant fire in the building where I stored a lot of my parts.  Today I was finally given access to get out what I could find.  I was meticulous at bagging and tagging everything as I took the car apart, but all that is gone.  I have lost a lot of interior stuff, and a lot of the original fasteners.  I did manage to get window frames and regulators out, less one vent window assembly, but for the life of me, I can't remember what these are.  I have 2.  TimC
     

     

    7/29/2018 9:33 PM  #2

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,259

    Re: Part ID help please

    My guess...Seats

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    7/29/2018 9:35 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,308

    Re: Part ID help please

    Vertical side mounting flange for a 17” radiator.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    7/30/2018 6:07 PM  #4

    cman66
    FYI Addict

    Offline

    From: Ponchatoula, LA
    Registered: 1/06/2018
    Posts: 181

    Re: Part ID help please

    Bingo,
    Radiator side bracket 
    MS gets the prize
    Cman
    PS tim let us know what you may need 
    I'm sure we all have some parts squirreled away.
     

    Last edited by cman66 (7/30/2018 6:10 PM)

     

    7/31/2018 6:34 AM  #5

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,892

    Re: Part ID help please

    Tim, I have a full...old, re-colored, red 66 interior.  Dash pad, seats, door panels.  I also have lots of door innards, usable windows, some hinges, prolly other stuff.  You want it?  You got it!  Might even figure a way to get it closer to you in the next couple of weeks.  Let me know.

    Oh, I also have a practically new four-row copper 20" radiator that I could be talked out of.

    BB

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

    7/31/2018 10:20 AM  #6

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 877

    Re: Part ID help please

    MS - Thanks for ID'ing the rad brackets.  I did have some fox, SN95, & 03 Cobra stuff stored, and looks like the FD comingled the stash...

    BB - Wow!  We certainly need some door innards for int & ext handles, rods, latches & locks, and all glass.  We lost all grill stuff, and nice headlight buckets and headlight doors .  We're all set firewall forward , except for hood hinges....

    Last edited by TimC (7/31/2018 10:25 AM)

       •Thread Starter
     

    7/31/2018 12:30 PM  #7

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,892

    Re: Part ID help please

    TimC wrote:

    MS - Thanks for ID'ing the rad brackets.  I did have some fox, SN95, & 03 Cobra stuff stored, and looks like the FD comingled the stash...

    BB - Wow!  We certainly need some door innards for int & ext handles, rods, latches & locks, and all glass.  We lost all grill stuff, and nice headlight buckets and headlight doors .  We're all set firewall forward , except for hood hinges....

    Do you need this stuff now, Tim or will October be okay?  I think I have usable...not new...glass and I know I have some latches, rods, etc.  May also have a set of hood hinges that I could be talked out of. 

    BB

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

    8/01/2018 7:50 AM  #8

    TimC
    I FYI 24-7

    Offline

    From: Wheaton, Illinois
    Registered: 4/01/2013
    Posts: 877

    Re: Part ID help please

    Bullet Bob wrote:

    Do you need this stuff now, Tim or will October be okay?  I think I have usable...not new...glass and I know I have some latches, rods, etc.  May also have a set of hood hinges that I could be talked out of. 

    BB

    BB - No immediate needs, except to express my deep appreciation.  THANKS so much for making stuff available.
     

       •Thread Starter
     

    8/01/2018 10:45 AM  #9

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,892

    Re: Part ID help please

    TimC wrote:

    Bullet Bob wrote:

    Do you need this stuff now, Tim or will October be okay?  I think I have usable...not new...glass and I know I have some latches, rods, etc.  May also have a set of hood hinges that I could be talked out of. 

    BB

    BB - No immediate needs, except to express my deep appreciation.  THANKS so much for making stuff available.
     

    I'll get everything rounded up and delivered to you after our gigantic East Coast adventure, Tim.

    BB

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Part ID help please

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.