FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » autolite 4100 help please

    • 1 of 1

       

    10/02/2018 6:19 AM  #1

    Alessandro
    I FYI 24-7

    Offline

    From: Modena -Italy
    Registered: 7/08/2016
    Posts: 707

    autolite 4100 help please

    Hello All  , can someone tell me the name of this carb parts , what are for , and if are so necessary .
    During the rebuild one get broken and the other one is open . 
    i don't know which is the purpose  of this being close .
    This is not my carb , i take pics from web .
    I can imagine is somekind of dam between front and rear bowl  .... but i prefer not bet....
    I cant find them .... need help 
    thanks !

     

    10/02/2018 5:25 PM  #2

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: autolite 4100 help please

    go online to: www.carberator-parts.com

    Also known as, Mike's carberator parts.......

    When the website opens, click on the "Technical" tab in the upper right hand corner of the page
    Then select, "carb by type"........then click on Motorcraft, autolite.....then select 4100......

    There are many helpful rebuild and parts identification video's associated with the 4100 that may be of help.....

     

    10/03/2018 8:31 AM  #3

    Alessandro
    I FYI 24-7

    Offline

    From: Modena -Italy
    Registered: 7/08/2016
    Posts: 707

    Re: autolite 4100 help please

    josh-kebob wrote:

    go online to: www.carberator-parts.com

    Also known as, Mike's carberator parts.......

    When the website opens, click on the "Technical" tab in the upper right hand corner of the page
    Then select, "carb by type"........then click on Motorcraft, autolite.....then select 4100......

    There are many helpful rebuild and parts identification video's associated with the 4100 that may be of help.....

    Thanks josh  i just place an order for jets and screw to mike's . 
    About brass pieces i have found what is for and ordered  at gottafish carburators ( very difficult to find ) 
    Also the 4100 diagram do not talk about it . 
    Thanks for help !
     

       •Thread Starter
     

    10/03/2018 12:05 PM  #4

    josh-kebob
    Senior 24-7 FYI Addict

    Offline

    From: Madison, AL
    Registered: 4/06/2013
    Posts: 2,902

    Re: autolite 4100 help please

    Happy to help.....I'm running a 4100 as well but, had it rebuild by a local carb shop....works great....

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  autolite 4100 help please

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.