FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Drop base air cleaner..........

    • 1 of 1

       

    10/15/2018 7:23 PM  #1

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,877

    Drop base air cleaner..........

    All you 65/66 Mustang guyz........how many of y'all have a drop base air cleaner?
                                                        how many of y'all have a   flat  base air cleaner
    AND use and Edelbrock  carb  and Performer RPM mani?   What I have now is a 2" air filter....
    My air cleaner is scrubbing the paint off the underside of my hood!(NOT just the hold down stud)
    Since the "beach" has seen fit to rust the  shiney off my old one.....think'in bout a drop base...wanna make sure it will fit
    Thanx
    6sal6

    Last edited by 6sally6 (10/16/2018 5:50 PM)

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    10/15/2018 10:37 PM  #2

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,257

    Re: Drop base air cleaner..........

    What's your intake manifold & engine?

    My Performer worked ok with a dropped base air cleaner & Edelbrock carb.  I had less than a half inch clearance, but a Performer RPM would not fit - too tall for my car.  Obviously an Air Gap would be too tall too.  I have a 351W.  The 289/302/5.0 block will give more room, so those other manifolds might fit.  You could also try a shorter air cleaner.

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    10/15/2018 10:46 PM  #3

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,673

    Re: Drop base air cleaner..........

    Sally, I cut a hole in my hood before I found out about the drop base air cleaner. ;-)

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    10/16/2018 8:40 AM  #4

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,983

    Re: Drop base air cleaner..........

    C'mon Mike, it's a hot, hot rod, run it with a hood "delete" 

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    10/16/2018 12:09 PM  #5

    TKOPerformance
    Hyper FYIFORD ADDICT

    Online!

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,527

    Re: Drop base air cleaner..........

    My '67 has room to spare above the Performer RPM, Edlebrock 1403, and repro Hi-Po air cleaner, even with a 1" carb spacer.  I test fit it by installing just the carb with no air cleaner stud, then making a box out of cardboard the size of the air cleaner and shutting the hood.  If it didn't smash the box I was good.  I then went bigger and bigger until it did so I knew about how much clearance I had. 

     

    10/16/2018 5:00 PM  #6

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,983

    Re: Drop base air cleaner..........

    Put a set of adjustable motor mounts on it and drop the engine and inch.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    10/19/2018 7:42 PM  #7

    Bentworker
    I FYI 24-7

    Offline

    Registered: 9/17/2017
    Posts: 475

    Re: Drop base air cleaner..........

    I have a 14” Black Edelbrock base that is about 5/8” drop if you want to try it.  Won’t work for me so it is occupying garage space.

    Free.99 you pay to ship

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Drop base air cleaner..........

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.