FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

10/26/2018 5:57 PM  #1


v8 drum spindles

Sorry if this is a redundant question, but it just need a quick answer;
Will 66 V8 drum spindles work for KH disc brakes ?
Oh wait no quick answer as i has another question too:
1965/66  I6 c4 trans vs V8 c4 same? or is the V8 have better parts?
 


Yeah, I know, but...
 

10/26/2018 8:54 PM  #2


Re: v8 drum spindles

V8 drum spindles will accept the brackets for the KH discs and also any of the aftermarket disc brake setups out there.

I think the C4 is the same but the torque converter may be different between the six and V8.

BB


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.