FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Flexable radiator hoses....

    • 1 of 1

       

    4/07/2013 11:34 PM  #1

    faraz79415
    FYI FORD Member

    Offline

    Registered: 4/06/2013
    Posts: 14

    Flexable radiator hoses....

    Has anyone used any of these flex hoses I see at autozone and o'reillys?? Are they any good?? I guess you don't have to cut these down??

     

     

    4/07/2013 11:55 PM  #2

    hmartin025
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 365

    Re: Flexable radiator hoses....

    Well, they will work But, they look unprofessional and since they are not formed put lots of pressure on radiator outlets. One thing they work well on! An emergency!!!
    Howard

    Last edited by hmartin025 (4/08/2013 9:15 AM)

     

    4/08/2013 6:40 AM  #3

    Smitten
    FYI FORD Member

    Offline

    From: FL
    Registered: 4/01/2013
    Posts: 19

    Re: Flexable radiator hoses....

    Totally agree. I had planned to use them but once the car was finished, it just looked 'cheap'. I got the molded hoses and kept the flexible ones for emergency only use as Howard suggests.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Flexable radiator hoses....

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.