FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Will a power steering pump from a 90 5.0 work in a 65 Mustang

    • 1 2  Jump to

       

    11/02/2018 5:13 PM  #26

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,349

    Re: Will a power steering pump from a 90 5.0 work in a 65 Mustang

    I looked up the Napa NPS7311 fitting. Still not fully clear how this is coupled to 289 power steering hose.  Anyone have pictures and additional part numbers required?

     

    11/02/2018 8:38 PM  #27

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,428

    Re: Will a power steering pump from a 90 5.0 work in a 65 Mustang

    I'll take a pic of mine when I get back to town in two days.

    "Those telephone poles were like a picket fence"
     

    11/02/2018 10:35 PM  #28

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,349

    Re: Will a power steering pump from a 90 5.0 work in a 65 Mustang

    Awesome thanks. Donor was a 92 gt...jic.

     

    11/03/2018 8:55 PM  #29

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,428

    Re: Will a power steering pump from a 90 5.0 work in a 65 Mustang

    This is on a 95 donor with the pump up high. the factory length was perfect.
    For a 92 donor, which should need a shorter hose, I'd put some tape around the hose at 12" from where you want the centreline of the Napa fitting to end up, mark what angle you need it to exit the hose in relation to the angle at the other end, then take it to a hydraulic hose type repair shop and have it crimped on with a new crimp collar.

    "Those telephone poles were like a picket fence"
     

    11/04/2018 1:14 AM  #30

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,349

    Re: Will a power steering pump from a 90 5.0 work in a 65 Mustang

    Thanks for the picture and the help.  I appreciate it.  Didn’t realize a banjo bolt would fit the 92 pump.  In the meantime I headed to town today with both hoses with me to find a solution. (What’s patience?)  Found another solution to add to our toolbox.  From Advanced Auto Parts ( or hydraulic shop) Gates part number G50510-0606 (old part 80732) hydraulic fitting.  It’s a 3/8” hydraulic hose to 3/8” compression for hydraulic lines.  There is one for 1/4” hose to 1/4” compression as well but I did not get the part number for that today.
    Both pump end hardlines (65 and 92) were cut as long as possible next to hydraulic crimp.
    Then (65) remaining pump end crimp was cut off.  The hydraulic hose to compression fitting is crimped onto the (65) line. Would post a picture, haven’t figured it out yet.

     

     

    1 2  Jump to

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Will a power steering pump from a 90 5.0 work in a 65 Mustang

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.