FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » tremec tko 600

    • 1 of 1

       

    2/16/2019 6:41 PM  #1

    1fststang
    I FYI 24-7

    Offline

    Registered: 6/02/2013
    Posts: 419

    tremec tko 600

    Hey, Stupid question.  Anyone know what size bolts are used to attach the transmission mount to the transmission on a tko 600?  I thought it was a 7/16-14 but that threads in but feels real loose to the point you can wobble the bolt back and forth until it threads well in to the bolt hole.  The tko 600 has two bolt patterns an inside set which I heard are metric and an outside set. I'm trying to use the outside set as they aligns with my mount.

    Tried a couple other metric bolts but they didn't thread in and I know its not fine thread.


     

     

    2/17/2019 6:11 AM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,526

    Re: tremec tko 600

    Tremecs are metric transmissions.  Closest size in metric would be a 12mm, likely with a 1.75mm thread pitch. 

     

    2/17/2019 11:33 PM  #3

    Bolted to Floor
    Senior 24-7 FYI Addict

    Offline

    From: Houston, Texas
    Registered: 4/01/2013
    Posts: 2,018

    Re: tremec tko 600

    Have you tried a 1/2-13?? Seem like that took a 3/4” socket on mine.

    John  -- 67 Mustang Coupe 390 5 speed
     

    2/19/2019 1:52 PM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,299

    Re: tremec tko 600

    I believe TKO is correct. They are for certain metric bolts.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  tremec tko 600

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.