FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

5/10/2019 7:27 PM  #1


Any tips on installing the 69 Headlamp and buckets?

3 of the lights the springs weren't even connected.  Looks like its a PIA to get the bucket in headlamp and try to get the spring on too.  Thanks Steve69

 

5/10/2019 10:40 PM  #2


Re: Any tips on installing the 69 Headlamp and buckets?

It's easier than it looks or sounds. Set the pieces in from the front, then pull the springs back thru the holes. I used a tool like this one.


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

5/11/2019 8:43 AM  #3


Re: Any tips on installing the 69 Headlamp and buckets?

rpm wrote:

It's easier than it looks or sounds. Set the pieces in from the front, then pull the springs back thru the holes. I used a tool like this one.

Old brake spring also works as a great tool.

 

5/11/2019 9:15 AM  #4


Re: Any tips on installing the 69 Headlamp and buckets?

Thanks Guys!   Its looks like it goes through the Bucket and light ring both? 

Last edited by Steve69 (5/11/2019 9:16 AM)

     Thread Starter
 

5/11/2019 9:24 AM  #5


Re: Any tips on installing the 69 Headlamp and buckets?

I just followed the steps in this video:

https://youtu.be/hYJ5t3gis6U


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.