FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

5/13/2019 4:50 PM  #1


Need advice on T5 rebuild/upgrade

I'm rebuilding the WC T5 in my 65 FB and was thinking of changing from the usual 3.35 gear set to the 2.95 gear set.  Seems like the best deal is with Astro: https://astroperformance.com/product/t-5-gear-kit-super-alloy/.  If anyone has a better idea, pls let me know.  I'm also installing the improved counter gear stabilizer.

While I'm at it, I was also wanting to overdrive it a bit more, as I'm running 3.70 gears in the rear and the rpms on the highway seem a bit high.  My current overdrive is 0.68.  I understand that if I transfer my current 5th gears to the new gear set, the overdrive ratio will be 0.59.  So I'm wondering about also installing the 5th gears from a T5Z spec (25/51 tooth counts), which by my calcs would give me a 0.63 overdrive ratio.  Below are my calcs: 

 My tires are about 25" tall and I'm calculating rpms as RPMs = (MPH x final drive ratio x 336)/tire diameter). Thanks for any advice.

                                                                                                                                                              


Cheap, Fast, Good:  Pick Any Two
 

5/13/2019 9:20 PM  #2


Re: Need advice on T5 rebuild/upgrade

I had a Fox with a T5Z (.63 OD) and 3.73 gears.  I was just about perfect IMO.  Plenty of giddyup and It seemed about perfect on the highway...just over 2200 at 70.

BB


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

5/13/2019 9:52 PM  #3


Re: Need advice on T5 rebuild/upgrade

Well, I'm finding out that apparently there is a shortage of 2.95 first gears.  Astro got back to me and said that gear is not being produced by the aftermarket and has been on back order since last year, so their kit is not actually available.  Other sources seem to have gears 2-5 but not the 2.95 first gear, or if they have it, that one gear is $200 or more. 

Last edited by jkordzi (5/13/2019 10:16 PM)


Cheap, Fast, Good:  Pick Any Two
     Thread Starter
 

5/14/2019 9:10 AM  #4


Re: Need advice on T5 rebuild/upgrade

Its been a problem for years now.  I used to be able to buy 1-4 and the countergear in superalloy for $450 to build my own Z-spec boxes for either Fords or Chevys, but the demand ebbed and the supply went with it.  Now the only 2.95 first gears available are actual Borg/Warner/Tremec made parts that are commanding a hefty premium.  You could try Hanlon, or possibly eBay.  Might get lucky, but unfortunately $200 is about the going rate for one if the guy knows what he has.  Maybe one day the companies based in India will start making the 2.95s, but until then no real low cost option. 

 

5/15/2019 7:51 AM  #5


Re: Need advice on T5 rebuild/upgrade

Years ago, I built a cobra replica with a tremec behind a 427, 3.70 rear end. The 427 made plenty of torque off idle, so the 3.35 first gear was so short as to be useless most of the time. Calculating gears for my mustang, I ended up with the 2.95 first gear, .63 fifth gear, about 12.8 inch dynamic tire height and a 3.55 rear end. I find this combination very good around town and on the open road, anywhere from 65 mph to 75 mph is the sweet spot. I don't have a tachometer, but rpm for that speed range is about 1950-2150 rpm. This works perfect for me on longer drives. Of course, your engine build, driving habits and type of driving will dictate what gears are best for you.

 

5/15/2019 7:52 AM  #6


Re: Need advice on T5 rebuild/upgrade

Years ago, I built a cobra replica with a tremec behind a 427, 3.70 rear end. The 427 made plenty of torque off idle, so the 3.35 first gear was so short as to be useless most of the time. Calculating gears for my mustang, I ended up with the 2.95 first gear, .63 fifth gear, about 12.8 inch dynamic tire height and a 3.55 rear end. I find this combination very good around town and on the open road, anywhere from 65 mph to 75 mph is the sweet spot. I don't have a tachometer, but rpm for that speed range is about 1950-2150 rpm. This works perfect for me on longer drives. Of course, your engine build, driving habits and type of driving will dictate what gears are best for you.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.