FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

5/31/2019 11:56 AM  #1


Anyone ever have a Starter

that the starter drive wouldn't return.   When I started my engine after installing the AC compressor I was getting this very loud noise from the engine and after a couple of minutes it was gone.   So I disconnected the serpentine belt and started the engine.  Still have the noise.  I think its the starter gear not returning and after a few minutes it returns.  It is a mini starter that I've had for 10 years with no issues.

Thanks for the help
Steve69

 

5/31/2019 3:50 PM  #2


Re: Anyone ever have a Starter

Never experienced it myself, but I have heard of it.  Basically the bendix goes bad.  I would remove the starter and try bench testing it. 

 

5/31/2019 6:24 PM  #3


Re: Anyone ever have a Starter

You COULD................climb out of the car.....roll underneath it with a BFH and give it a few whacks to make the bendix disengage every time it does it!?!

What's worng with that idea?!   
6sal6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

6/01/2019 6:47 PM  #4


Re: Anyone ever have a Starter

Thanks Guys!   Ill take it out this weekend and replace. 

     Thread Starter
 

6/01/2019 7:56 PM  #5


Re: Anyone ever have a Starter

You say it is a mini starter which usually has a solenoid to engage the gears. Most times when those have that problem after a few years, it is usually the spring dies or the thing just gets iked up and won't return correctly. A new one is a good plan!

 

6/02/2019 5:20 AM  #6


Re: Anyone ever have a Starter

Yeah, I stopped using those mini starters years ago.  I'd just get a Fox Mustang starter for a '92 5.0 application.  Much lighter, but OEM quality. 

 

6/03/2019 7:43 PM  #7


Re: Anyone ever have a Starter

Thanks Guys,

I switched to a mini starter because of Unisteer Rack.  Needed a little more room in the starter area.

Steve69

     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.