FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

8/20/2019 4:13 PM  #1


tear down a 2020 GT500 engine?


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

8/20/2019 6:16 PM  #2


Re: tear down a 2020 GT500 engine?

OTC stand at Summit, $1100, enjoy!

What was the point of taking it apart? I want to see them put it back together, then show that it runs.

 

8/20/2019 8:33 PM  #3


Re: tear down a 2020 GT500 engine?

That will undoubtedly take longer than 19 minutes, Hornman!
I think it was a QC thing...


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     Thread Starter
 

8/20/2019 9:21 PM  #4


Re: tear down a 2020 GT500 engine?

Notice how the various bolts were loosened in some order - like the opposite of the order bolts are installed?  Including the front cover.


Original owner - 351w,T-5, 4whl disks, power R&P
 

8/21/2019 8:34 AM  #5


Re: tear down a 2020 GT500 engine?

MS yes those engine stands are nice with side support from both the engine mount bosses it is very steady and everything is accessible. I built one years ago after I saw one in use.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.