FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 67 mirror on a 66 GT350

    • 1 of 1

       

    10/20/2019 3:43 PM  #1

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,293

    67 mirror on a 66 GT350

    You asked what it looked like.



    On a real 66 GT350 at the Dam Fine car show today.


    roll the dices

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    10/21/2019 5:33 AM  #2

    Toploader
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/15/2013
    Posts: 1,640

    Re: 67 mirror on a 66 GT350

    Yeah, I'm not sure Steve... What do you think?

    1964-1/2 D Code Coupe - 289 V8, 4 Speed Toploader, 3.00 ratio rear, Autolite 4100 Carb, 15" tires, Pertronix ignition
     

    10/21/2019 2:02 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,293

    Re: 67 mirror on a 66 GT350

    When I first walked up to the car and saw the mirror, my first thought was about your post, and my second though was... that does not look bad at all.

    But, I would think a brand new 67-70 mirror such as that one probably has the same stability problem as a brand new 65-66 mirror.  So, what is the gain.  He just happened to have an original FORD 67 mirror to use and it does not easily move around.  When mine get loose, I will just do the epoxy thing to them like I did my previous set.

    Bottom line:  Nobody is going to berate you if you install a mirror of your choice on your Mustang.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

    10/21/2019 4:12 PM  #4

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,868

    Re: 67 mirror on a 66 GT350

    My 'bud' has a set on his 66. Looks reallllly super! The square design sorta compliments the square-ish front/hood of the 66.
    I'm think'in maybe when I replace my mirrors.
    I lik'em!
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    10/21/2019 10:03 PM  #5

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,448

    Re: 67 mirror on a 66 GT350

    I ORIGINALLY WANTED TO PUT 69 MACH ONE ON MY 66 BUT AFTER I SAW GLEN'S WITH THE 93 CONVERTIBLE MIRRORS I WENT WITH THEM....HE GAVE ME THE SPECIAL RUBBER/SPACER/GASKET THAT GOES ON PASSENGER SIDE AT A BASH I BELIEVE WHEN HE CAME TO THE BASH I HOSTED IN CARROLLTON GEORGIA AND I LOST IT BEFORE I PUT IT ON ....I REALLY NEED TO FIND ONE OF THE GASKETS.
     

    Its really me....I fixed my caps lock .
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  67 mirror on a 66 GT350

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.